EPISODE 8: FINISHING TOUCHES - RENOVATING MY VICTORIAN HOME

Toronto Home renovations - victorian style home - custom staircase - spray gun painting staircase post and stair spindles

The stair balusters after being painted in a bedroom we turned into a giant spray paint booth!

RENOVATING MY TORONTO VICTORIAN HOME - EPISODE 8!

As the finishes come to a close, it’s hard not to look back on this year-long home renovation project and take stock of how far we have come. This past year, Adam and I faced a lot of ‘firsts’. First time demolishing a wall, first time doing any structural work, first time widening a staircase, framing out new bedrooms, doing insulation work - the list goes on. It’s true, ‘anything worth doing is going to be difficult’ and renovating our 125 year old Victorian home was no exception!

For those who have been following Adam and I’s home renovation journey, thank you so much for the support this past year. You have honestly made creating these videos and sharing our experience with you such a joy and I hope you feel inspired to step out of your comfort zone and challenge yourself in some way too.

For those that are just tuning in, when Adam and I purchased this property as our first home, we knew it needed some work. The house had been divided into units with a ‘new-ish’ kitchen on the second floor and a very old, very small kitchen on the main floor.

Initially, Adam and I thought we would wait before doing any renovations; settle in, learn about the house, figure out its quirks, save a little money and then start the planning process. But soon after we moved in, we realized many of our appliances were broken and needed to be replaced. This ended up being the small nudge needed to get the ball rolling and so the process of planning our Toronto home renovation begun. Seven months later (and just in time for Adam’s birthday), we received our building permit and were ready to get started!

P.s. If you are interested in seeing/revisiting what the house looked like prior to renovations, you can go check out my ‘pre-renovation house tour!

Toronto Home renovations - victorian style home - kitchen renoation - neoclassical kitchen design with slim shaker cabinets

My custom, slim shaker cabinet style kitchen made by Domani Design Group

INSTALLATION OF MY CUSTOM KITCHEN CABINETS

After over a year in the making, this past month our custom kitchen was finally installed!

Adam and I love to cook so when it came to designing our dream kitchen, we wanted to make it the perfect space to entertain. Adam’s only request was to have a large island where his friends could sit around and chat with him while he cooks. I, on the other hand, needed it to be super functional for content creation and full of natural light for photos. In the end, Adam got his large kitchen island and I got the neoclassical kitchen of my dreams. Of course we didn’t do it alone! In order to ensure the flawless execution of our dream kitchen, Adam and I turned to Domani Design Group here in Toronto.

Located in the Castlefield & Caledonia Design District, Domani Design Group is a family run business with over 40 years of experience in designing and building custom kitchens. In addition to being a distributor of luxury European brands like Pedini, Domani also specializes in custom cabinetry for both kitchens and bathrooms.

Having just splurged on a new stove, I wanted the cabinetry to compliment our dark navy blue La Cornue duel range. To achieve this I ended up going with a slim shaker cabinet profile in a matching navy blue. To me this felt both contemporary and classic, and I knew it would work well with the large ornate crown mouldings I was eyeing from Parsiena Design and the Crittall style back door Adam and I had designed for our newly enlarged back entrance. When it came to our counter tops and back splash, I choose a Calacatta Gold made of Porcelain as I knew it’s superior durability and resistance to stains would ensure it lasted a lifetime. To help bring out the caramel streaks in the veins we chose a complimenting House of Rohl faucet in a polished brass finish as well as elevated knobs and pulls.


FOLLOW ME ON INSTAGRAM @ISTHATSOH


Toronto Home renovations - victorian style home - bathroom renovations - waterproofing and tiling of checkerboard tile floors

Master bathroom renovations are underway and for the tiled floors I went with a checkered tile pattern in blue and white with a border to match!

MASTER BATHROOM RENOVATION UPDATE

With the completion of our white oak herringbone floors from Chestnut Flooring, we began the tile work for our master bathroom. Taking inspiration from the checkered pattern seen in the hallways of Palace of Versailles and incorporating my favourite colour blue, I was able to source a suitable match locally. The trick with this space however was that it was quite small. Since the majority of it would be covered by the tub, floating vanity and shower, using the right size tile was important. If the tile was too large, the pattern would not be as apparent and feel almost like an afterthought. Conversely, if the tile were too small, it would be distracting and all that you notice. In the end I found a suitable 8x8 tile that, although was not honed marble like my inspiration, was well proportioned for the space, offered the durability associated with porcelain, and complimented the white and blue ‘marble’ porcelain slabs we chose for the shower walls. To help further pull the room together I ended up choosing a large white oak wall mount vanity, also in a slim shaker profile, with a white quartz counter top to match our shower curb. For hardware, a chrome faucets, tub filler and shower fixture finished off the rooms colour palette with a ‘polished’ detail.

While tiling for the mater bathroom was underway, Adam and I turned our attention to the cast iron tub in the basement. When we first moved in, I would never take baths upstairs in our master bathroom. To me, there was something about the bathtub that never felt quite safe and I worried that if I filled it with water as well as my body weight, I would find myself falling through the floor. Instead I would take baths in the basement where I had a beautiful claw foot cast iron tub that would keep the water warm for what seemed like ages. It didn’t take long for the basement bathroom to become my little sanctuary and when renovations began, I had no intentions of getting rid of my beloved tub. Instead, I convince Adam that the best course of action was to move the cast iron tub upstairs! Once disconnected, Adam along with the help of his brother, began its great migration. In the process, however, we learned that only one side of the tub had been painted gold, and the other half was black! To remedy the situation, we had our painter Ariel from South Hill Property Care refinish the tub and paint the outside of it silver to match the chrome hardware. In addition to the tub, we also painted the bathroom’s small cast iron radiator in the same silver colour and I think they both turned out better than imagined. Once the paint was dry and the tiling of the master bathroom was complete, we were then able to resume moving the cast iron tub to the second floor and place it in it’s final position! I still can’t believe it!

Toronto Home renovations - victorian style home - custom staircase - spray gun painting staircase post and stair spindles

The posts of my custom staircase after they were finished being spray gun painted!

PAINTING AND TRIM WORK

Not only did Ariel refinish my cast iron tub, but he also worked diligently on all the fine carpentry. From baseboards to installation of my new doors, over the course of a month much of the trim work was completed.

Since Ariel was also in charge of painting the house, he was able to give the new stair spindles and posts a layer of paint prior to install by turning one of the second floor bedrooms into a paint spray booth. It was so cool watching him use a spray gun and seeing how quickly he can work with his machine. Almost makes me want to buy a spray gun myself.

I also spent some time restoring some original trim that I had saved from the original house prior to the demo. I used a heat gun to remove layers and layer of paint and restore them to their natural wood material. Once bare I then sanded them down, used a little wood filler to cover up any dents and imperfections before handing them back to Ariel for re installation. I love the way these look in the corners of the window trim and doors and actually had Parsiena Design reproduce them for me in plaster so that I could introduce them in the upstairs windows as well. Unfortunately, due to the nature of plaster, they don’t fair well in moisture rich places like bathrooms but this is exactly where the old wood ones would be the best option.

INSTALLATION OF OUR CUSTOM STAIRCASE

Once Ariel was finished painting the stair balusters and posts we were able to get our stair installer back in to wrap up the stairs. Adam and I are so happy with how our custom staircase turned out and love the Victorian detailing in the ornate design of the stair spindles.


ENJOYING THIS CONTENT? CHECK OUT SOME OF MY OTHER EPISODES AND BLOG POSTS!


BASEMENT RENOVATION UPDATES

Since the last episode, Adam and I have also made further headway on the basement. Once the main drain was installed we could begin concentrating on removing some of the disturbed soil from the basement and clearing out space. Adam and I plan to continue working on the basement this spring and will likely be doing some underpinning to the foundation on at least one side of basement while benching the other. More on this phase of our renovation project to come in future episodes so stay tuned!

Toronto Home renovations - victorian style home - refurbished cast iron radiators from Ironworks Radiators Inc

My refurbished ornate Victorian rads are finally ready for installation!

INSTALLATION OF OUR CAST IRON RADIATORS

As the weather started to warm up and spring was officially upon us, we were also able to get all our radiators from Ironworks Radiator Inc installed. I am so happy with how the refurbished vintage ornate cast iron radiators we got from them turned out and I love my chosen paint colours. Now installed, there is no denying the character and elegance they add to the main floor, and how well they play into the house’s Victorian heritage.

If you love Victorian style houses or are just looking to refurbish your rads at home, I highly recommend checking out Ironworks Radiator Inc in Etobicoke. They have an extensive stockyard of Victorian radiators located at the back of their shop and their inventory is always changing. They also work directly with Castrad Radiators in the UK to import brand new cast iron radiators in various styles including more modern sleek silhouettes.

Toronto Home renovations - victorian style home - custom staircase - spray gun painting

Painting of my custom staircase by South Hill Property Care

PAINTING THE HOUSE

Once Ariel was finished all the fine carpentry work, he was able to turn his attention to painting the rest of the house. We ended up going with Benjamin Moore’s ‘Chantilly Lace’ which truth be told caused him somewhat of a headache because it was so white that it took several coats to conceal inconsistencies in the walls. In total Ariel said he had to use about 4-5 coats on the walls and 3 coats on the trim to achieve a finish we were all happy with. Word to the wise, if you are thinking about painting your house Chantilly Lace prepare yourself for many coats!

Even though this is all I have to share today, there is still so much more work to be done at the house. All our appliances still need to be installed, Adam and I will be working on underpinning the basement in the spring, and our new tiles from Winckelman Tiles in collaboration with Deco Tile will be arriving soon! All this and more to come in future episodes!

Toronto Home renovations - victorian style home

My Toronto Victorian home currently undergoing a major renovation

Thank you so much for joining me today and for checking out my new Toronto home renovation series on Youtube. I am super excited to be modernizing a Victorian home while still keeping the charm of an old Victorian house. If you have any questions about my Victorian house renovations, what it’s like to live in Little Portugal, Toronto or recommendations for Toronto contractors, hit me up in the comments below!

Before I sign off, I’d also like to say a big thank you to Domani Design Group, Chestnut Flooring, Parsiena Design and Ironworks Radiator Inc for partnering with me on this project. I’m so excited to be working with local experts on our Toronto home renovations but want to reiterate that, like always, all opinions remain my own.

Until next time,

- Soheila

MORE BTS PHOTOS FROM THIS EPISODE


PIN THIS POST

EPISODE 4: HOUSTON, WE HAVE A PROBLEM! - RENOVATING MY TORONTO VICTORIAN HOME

Preparing to demo the middle half of the 2nd floor

RENOVATING MY TORONTO VICTORIAN HOME - EPISODE 4!

Following the completion of the work we did in the back half of the house, Adam and I were definitely riding an emotional high. We knew that even a seasoned contractor would have found the task we had decided to take on to be challenging and the fact that we figured it out ourselves only fuelled our fire to keep going. There was plenty of work still to be done but nothing could have prepared us for what was to come.

Proceeding to lay down a new sub floor on the back half of the second floor, Adam and I still had to demo the walls, ceiling and floors in the middle half of the second floor. Originally we had only planned to widen the staircase in this area but now that we had pulled the second floor into Phase 1 of our renovation, this area would occupy our new hallway that runs along side the stairs as well as our new master bathroom. In order to prepare for framing the new second floor layout though, we would first need to finish demoing this area.


FOLLOW ME ON INSTAGRAM @ISTHATSOH


BEFORE AND AFTER PHOTO’S FROM OUR SECOND FLOOR DEMO!

Chaotic doesn’t even begin to describe how this next task went. Adam and I waded through rubble of lath and plaster, drywall, steel mesh and insulation for hours. The room was so thick with dust we could barely see more then 10 feet in front of us. Thankfully we were prepared with protective Tyvek suits, commercial grade respirators, and lots and lots of garbage bags. In order to avoid the dust from going to other parts of the house we had barricaded ourselves in by first covering the staircase opening with plastic before laying down planks of wood across it and covering it with plywood. There was no way in or out, and Adam and I had to keep going until all the work was done. Six hours, 80 garbage bags, and what felt like 10 pounds of sweat later, we were done. Despite wearing protective gear my legs were black and my face looked like I had a charcoal mask on. We were filthy and completely depleted!

What we didn’t anticipate to find was that the ceiling joists in this section of the house actually run the opposite way as the joists in the rest of the house. This came as a complete shock to us and totally added an unexpected challenge. Unsure of how this would change our plans to frame out a new layout, we knew we would have to have our residential structural engineer to come back in and take stock of our new findings.

STRUCTURAL ENGINEER

Since the very beginning, our structural engineer Ken Davis of K.H. Davis Engineering Consultants LTD has been nothing but amazing. Not only does he have great credentials and has worked on numerous Toronto century homes before, but he has been tremendously helpful with answering all our questions. Whenever a problem has arose during our home renovation that has caused concerns or a need to pivot, he’s been the first one we call and has always found a solution that works for our budget. If you’re even thinking about removing a load barring wall in your house, trust me when I say you’ll want someone like Ken on your team.

As we awaited news from Ken, we still had a lot of work to do. We still needed to finish widening the staircase and level the floors in the middle section of the second floor and we still needed to finish framing the first floor including build bulkheads for our incoming kitchen cabinets. Compared to the joist work we had previously done these tasks were a piece of cake and I actually quite enjoyed learning how to properly frame out a house.

HARDWOOD FLOORING IN TORONTO

Chestnut Flooring Showroom is located at 8601 Jane St, Concord, ON L4K 5N9 Tel: (905) 761-6655

Although our Toronto Victorian home renovation did see yet another unexpected delay, it also gave us time to go shopping for additional flooring for the second floor. Prior to starting our home renovation and my new home renovation series on YouTube, Adam and I talked extensively about what our dream house would look like. One design feature that I was obsessed with incorporating into our renovation was herringbone floors throughout the main floor. Only once we started to visit showrooms and look for a good suppliers did we stumble upon Chestnut Flooring in Vaughan.

Chestnut Flooring is a family-owned, full service, one-stop-shop for all your flooring needs. They offer a wide range of flooring products including hardwood, engineered, laminate, carpet, vinyl and even tile from both well-known domestic and international brands.

Since Adam and I were very happy with the white oak herringbone floors we previously bought from Chestnut Flooring a few months earlier, it was a no brainier for us to pay their showroom another visit now that we needed floors for the second floor. Within an hour we were in and out of the showroom, having found numerous suitable option and given the helpful advice we had received from the co-owner Sherry. I have never been one to make a design decision quickly and even shocked myself with how fast I was able to make a decision. I guess when you know, you know, and being in good hands with a great supplier gave me the comfort I needed to not have to think twice.

Chestnut Flooring has a wide selection of hardwood flooring, engineered flooring, laminate, carpet, vinyl and even tile from both well-known domestic and international brands.

UPDATES ON MY CAST IRON RADIATORS

Following the pickup of our cast iron Victorian radiators for refurbishment, I heard from Ironworks Radiators Inc that one of our radiators did not pass its pressure test. Unfortunately, the ornate Victorian column radiator that we had found hiding behind a clunky rad cover on the main floor was missing a leg and where that leg used to be, was a tiny hole. In order to repair the radiator they would have had to saw it into three pieces, remove that cast iron column where the hole was and solder the remaining two pieces back together. Although Ironworks has successfully done this repair before, there was no guarantee it would work for our Victorian radiators so Adam and I decided that the safest approach to this problem would be to buy an additional vintage cast iron radiator from Ironworks Radiators Inc stockyard.

Ironworks Radiators Inc Stockyard - Located at 367 Bering Ave Etobicoke, ON M8Z 3B1 - By Appointment Only!

Located on the boarder of Toronto and Etobicoke, Ironwork’s stockyard is full of vintage radiators waiting to be refurbished! The owner of Ironworks Jennifer, has been collecting radiators for years often going into old homes and removing all the ornate radiators before they are demolished. She’s always adding new and unique finds and her inventory is always changing which makes each visit fun to her stockyard a fun little treasure hunt. Once there, not only was I able to quickly make a decision about which vintage Victorian radiators I wanted to purchase for refurbishment, but I also got to see a model of the two new Castrad radiators I was planning to purchase for under the twin kitchen windows. I would also come to realize later how helpful browsing her showroom and shop was when it came time to selecting custom colours for all the cast iron radiators I was purchasing! A decision I struggled with for weeks!!

PHOTO’S FROM MY VISIT TO THE IRONWORKS STOCKYARD

Well there you have it, our renovation continues to move ahead now that we have heard back from Ken regarding the second floor. Turns out we will need to do some additional structural work to the second floor, but it’s nothing that Adam, his dad and I can’t handle ourselves. Stay tuned for more on this in the next episode!


ENJOYING THIS CONTENT? CHECK OUT SOME OF MY OTHER EPISODES AND DIY’S


Home sweet Home! My smoke bush out front has grown out of control over the summer! I am looking forward to doing more landscaping and gardening next year!

If you don’t want to wait for the next episode to catch a glimpse of what is happening behind the scenes you can always follow me on Instagram where I share up-to-date stories of my interior design and renovation progress!

Thank you so much for joining me today and for checking out my new Toronto home renovation series on Youtube. I am super excited to be modernizing a Victorian home while still keeping the charm of an old Victorian house. If you have any questions about my Victorian house renovations, what it’s like to live in Little Portugal, Toronto or recommendations for Toronto contractors, hit me up in the comments below!

Before I sign off, I’d also like to say a big thank you to Chestnut Flooring and Ironworks Radiator Inc for partnering with us on this project. I’m so excited to be working with local industry experts on our Toronto home renovations but want to reiterate that, like always, all opinions remain my own.

Until next time,

- Soheila

A shot of the Toronto city skyline in the fall of 2022


PIN THIS POST!

SPILLING TEA: ALL MY JUICY RENO PLANS & INSPO!

My Romanesque style Toronto Victorian home


It’s been almost six months since we moved into our Toronto Victorian Home and yet waking up and walking from one room to the next still feels so unreal sometimes. The spark we first felt when we initially toured the house is still very much alive and it all just goes to show that our crazy first time home buyer experience was worth the struggles. In the end, we found a beautiful house in a great neighborhood that we have been loving learning more about and exploring.

OUR CREEPY HIDDEN STAIRCASE

Being over 125 years old, our Romanesque style Victorian home does come with its fair share of quirks. For one, we discovered a creepy hidden staircase in a wall while planning out our main floor renovations! We suspect it was closed off to hide plumbing to the second floor bathroom and make room for a new staircase to the basement, but given it features the same high baseboards you see in other parts of the house, the staircase was likely part of the original house.

Additionally, when we bought the house we noticed that the floors sagged. This is a common characteristic of old houses usually equated to their age, but upon further inspection by our structural engineer, we began to suspect that load bearing walls in the basement had been removed by a previous owner at some point. Thankfully the foundation of the building is sound and our renovation plans will address this issue.


FOLLOW ME ON INSTAGRAM @ISTHATSOH


One thing I am 1000% doing is preserving the historical charm of the house as much as possible. Both the entrance way and drawing room feature high baseboards and crown molding centered around exquisite Victorian ceiling medallions. I also love the original ornamental molding that can be found throughout the first floor that embellishes the doorways including the main entrance. Unfortunately, a lot of these decorative molding features have been removed from the second floor, so one thing I’m definitely including on my ‘to do’ list is custom mill work to incorporate it back in.

Speaking of ‘to do list’, the reason why I am sharing today’s post is not only to expand on my pre reno tour, kitchen appliance tips, and share interior design inspiration for my upcoming renovations but it’s also to introduce a new Youtube series I’m going to be filming, documenting our renovation journey! I feel like this house and first floor renovation is going to be an amazing opportunity to share about my love for design and create entertaining content to excite you. There no doubt will be challenges but it’s in those challenges that great stories are made so I hope you will join me on this journey.

Of course, by way of this blog post I also wanted to give you a sneak peak into all the beautiful inspiration I’ve been collecting, what we are planning, and why we called in a structural engineer to help us. SPOILER: it goes beyond sagging floors!


RENOVATING A VICTORIAN HOME

Given our budget after buying the house and the fact that it is currently split into two units, Adam and I decided the best way to approach our top to bottom renovation is to split each floor into phases. This way, we can continue to live in the house during the renovations while still having a working kitchen on the second floor.

As you have probably guessed by now, phase one of this project is going to include a complete first floor renovation. Structural changes to support this, including widening the staircases on both the main and lower floor, will also be taking place as well as reintroducing an entrance way from the front hallway into the drawing room and removing unoriginal walls to create an open concept layout towards the back of the house where you will find a new kitchen, powder room, and bar. The sun-room at the back of the house will eventually be demolished so as to reclaim more of the backyard and a larger door opening will be created to replace it allowing for maximum natural light.

I will be elaborating further about these design choices throughout this blog post as well as providing inspirational images to help you visualize what we are planning. So without further ado, let’s start with diving into each element our renovation plan starting with structural changes.


STRUCTURAL CHANGES

I knew prior to starting our first time home buying journey that I loved Victorian homes so while on our quest we visited many renovated Toronto Victorian homes. A common repeated feature we noticed was an open concept layout on the first floor which, when paired with high ceilings, not only made the house look bigger but grander! Since original walls only seem to exist at the front of our house, Adam and I had no hesitations when deciding to alter the main floor layout by removing walls to make room for a larger kitchen and overall entertaining space. We learned that making these layout changes would require additional steel beams to provide stability and prevent structural issues that could arise later in the other phases of our renovations.

Additionally, since we wanted to demolish the sunroom and reclaim more backyard space we saw this as an opportunity to install a larger opening for a new doorway leading to the backyard. Doing this would require a steal frame to be installed to support the brick wall at the back of the house.

Pre Reno Kitchen and Sun Room - Photo Cred Raffi Tutundijan @jaggedlens

CRITTALL STYLE DOORS

Originally, Adam and I were thinking of doing a large steel Crittall style doors as the back entrance door, however after pricing it out and seeing what the lead times would be to have one made big enough for the opening (it would have to be custom made) we got cold feet.

Living in a cold climate, steel Crittall doors aren’t known for being the most energy efficient door systems since they aren’t great at preventing heat from escaping or blocking the cold from coming in. The Toronto Building Code does have a minimum thermal break requirement for all external doors which is why aluminum doors or fiberglass doors are more common (they offer superior energy efficiency when compared to steel) as well as cheaper. Alas, we are still undecided which way we will go but here’s some inspiration of what we are thinking.


ENJOYING THIS POST? CHECK OUT SOME OF MY OTHER RECENT LIFESTYLE POSTS


Further, it wasn’t until we moved in and tried to get furniture to the second floor and basement that we realized how narrow our staircases are! When it comes to staircases, Toronto’s current building code requires staircases in new builds to be a minimum of 36 inch wide. Historically, staircases were never this wide and although our staircase is not original, the opening was never widened by a previous owner. Our staircase comes in at 27 inches making it extremely hard to fit assembled furniture upstairs. For the longest time Adam and I wracked out heads trying to figure out how the previous owners managed to get the kitchen appliances up to the second floor. It wasn’t until we finally measured the width of the doorway to the small front balcony off our master bedroom that we figured out they must have removed the door temporarily and craned them in through the small balcony! Crazy right!? One of the biggest and possibly most pivotal decisions we had to make when putting together our renovation plans was figuring out whether we were going to address our narrow stair issue, how it would impact the structure of the home, and how much widening and replacing both staircases would be.

WOOD STAIRCASE DESIGNS

After finally deciding to move forward with widening the staircases, Adam and I debated whether to go more modern or keep it classic with the new stairs. We both love the look of floating stairs but given how much traditional character the house has, we ended up going for a more traditional design. But I’m sure we will add a modern twist somehow.

Lastly, structural issues in the basement that caused the floors on the main level to sag needed to be addressed before we can lay down a new subfloor and install new floors. To do this it seems that a few new beams will have to go in on the lower level - especially at the front of the house - to ensure the new floors won’t buckle a few years down the road. Installing these new beams will be also help us address the issues on unsupported over-spanned joists that we believe were caused by the removal of a load bearing wall in the basement by a previous owner.

Speaking of floors, I’ve been obsessed with mosaic and herringbone floors for years! Prior to buying a house, I told Adam that I hope whatever we ended up with needed new floors so I would have an built in excuse. During our viewings we saw a few Toronto Victorian's with mosaic and inlaid floors that only continued to fuel my obsession.


CURRENT FLOORING

Currently, the main floor has three different types of flooring going on, one of which does look original. However, it’s only a small section at the back and they aren’t in the greatest shape. If there was more of it and it was in better shape I may reconsider redoing the floors, but in our case this is one ‘out with the old in with the new’ sacrifice I’m willing to make. Traditionally herringbone floors were made of oak and these days you can get them in engineered oak in many different sizes and colours. Narrowing it down to a size was exceptionally hard given the size of the space. Too large and you don’t notice them, but too small and it’s all you notice. It needs to be balanced! In the end we went with a 90 mm natural oak herringbone colour which I am so excited about. It’s going to add warmth back into the space and match beautifully with what we have planned for the kitchen. I can’t wait!

HERRINGBONE FLOOR INSPO

I’ve shared a little bit about the kitchen appliances we ordered a few months back but when it comes to designing my dream kitchen you can bet it won’t be all white! In order to ensure flawless execution for this part of the project, I brought in the big guns, Domani Design Group. Not only does Domani distribute luxury European brands like Pedini but they also specialize in custom cabinetry for both kitchens and bathrooms as well as custom millwork! Just what I needed!

To us, the kitchen is truly the heart of the house and both Adam and I love to cook and entertain. With 10 foot ceilings and an open concept layout, I wanted the kitchen to feel airy but still anchoring, warm and full of natural light. Currently we have two big beautiful windows in our hallway that we plan to position the island between. For cabinetry we are keeping it simple, timeless, and classic but modern with a shaker style kitchen in a dark French navy to match our La Cornue range in the same colour with brass accents. The La Cornue range is going to be the centrepiece so I wanted cabinetry to compliment it, but not compete.

SHAKER STYLE KITCHEN INSPO

A warm porcelain countertop in a Calacatta with brown-gold warms up the space and plays on the natural oak herringbone floors. Floating shelves in a cool natural wood surround a simple and understated range hood which extends all the way to the ceiling to accentuate the height of the room. Bar seating will surround the kitchen island sink. I have even gone so far as to start to think how I will organize the kitchen and have submitted special millwork request to Oscar at Domani including a pull out spice rack and cabinet pull out drawers for my small appliances! I’m so excited!


KITCHEN STORAGE & ORGANIZATION IDEAS


I obviously don’t expect this renovation to go smoothly. I’m actually banking that it’s not so that I have some great stories to come back and share, but I am super excited for all that is to come. I’m also super excited to document and create my Youtube series around it so you guys can get a sense of the process too! If you aren’t following me already make sure to subscribe to my YouTube channel and follow me on Instagram for updates on this phase 1 renovation and more design projects I have in mind!


PIN THIS POST