EPISODE 10: IT'S FINALLY HAPPENING - RENOVATING MY VICTORIAN HOME

Toronto home renovation - victorian style house - winckelman tiles - victorian mosaic tiles with Border design - bathroom renovations in Toronto - powder room ideas

We finally installed the Victorian mosaic tiles I ordered from Winckelmans in the powder room!

RENOVATING MY TORONTO VICTORIAN HOME - EPISODE 10!

I know it’s been a few months since I last released an episode of my home renovation series but that is not because Adam and I have been relaxing and enjoying the summer, quite the contrary! Since moving back into the house and getting ourselves settled in, we have had to put our bigger renovation plans on the back burner and switch gears to concentrate on planning our wedding and getting married in Italy!

If you missed our big news, this past September Adam and I got married in Tuscany at the beautiful San Galgano Abbey. We kicked off our trip with a whirlwind weekend in Florence with friends before heading to Tuscany to check into our wedding villa where we would be hosting the majority of our wedding event. On the first night we hosted a large welcome dinner under the stars for all our guests before getting married the following day in front of all our family and friends. It was such a beautiful wedding and reception - a total dream come true! After one week in Italy, Adam and I headed to Croatia for our honeymoon where we spent a few days at a luxury boutique hotel in Hvar before sailing around to a few Croatian islands and finishing up in Dubrovnik for the last couple nights.

modern victorian house - home renovations toronto - foyer tiles - winckelman tiles black and white victorian tiles with boarder design

My dreams of having Victorian Tiles in my house have finally come true!

Installation of My Victorian Mosaic Tiles From Winckelmans Tiles

Before leaving for our wedding, we were able to get a few things off our to-do list including the installation of our new Victorian mosaic tiles from Winckelmans Tiles that we had previously picked up from their distributor in Toronto, Deco Tile.

It felt so good to finally have my tiles from Winckelmans installed! Adam’s dad ended up helping me with the foyer install (making sure to add in some Schluter Ditra lining for extra waterproofing protection) while Duran from DuWolf tackled the powder room to ensure we could get both spaces done before we left. Although the sheeted tile format (which my Winckelmans Tiles came in) does make the installation process easier, it still takes a lot of thoughtful planning to make sure everything lines up properly and is measured and cut perfectly, so the install is no easy feat! In the end, both spaces turned out even better then I or Adam could have imagined and the black and white Victorian tiles with a matching boarder design turned out super sophisticated/elegant. I love how when you walk into the house the foyer plays off the black and white staircase in the background too which makes the whole entrance way feel cohesive and inviting.

There is still a lot of work we have to do to the powder room following the tile install on one of the walls and floor but I can already tell it’s going to look great once it’s done and the custom Victorian stained glass window I’m having made is installed. Stay tuned for the final look in the next episode!

Toronto home renoation - arched wine cabinet with fridge - compact wine fridge - at home bar cabinet with coffee nook - victorian cast iron radiator and herringbone floors with brass inlay

Our arched bar with wine storage is looking better than ever!

Installation of Our Wine Cabinet With Fridge for Our
Home Bar & Coffee Nook

Another job we were able to check off our to-do list before heading to Italy was the installation of our little arched bar/coffee nook!

Do you remember back in episode 6 when we started drywall and framed out an interior archway for a future little bar area with wine cabinet and wine fridge? Well the custom cabinetry we had ordered was finally ready for install! I went for a super simple design that played off the kitchen’s navy blue palette by having a small cubby with slanted shelves (perfect for storing wine bottles) made with a small drawer on top to hold bottle openers etc. We used the left over Calacatta Gold porcelain from the kitchen for a counter top and duplicated the natural oak shelves to add additional storage for liquor bottles and bar paraphernalia. All we had to do once the navy blue bar cabinet and shelves were installed was plug in our new dual zone wine fridge and Nespresso machine, and decorate! Adam and I saved a whole case of wine from our wedding that we are planning to stash away and open on future anniversaries so I’m really happy to have a nice space to store them. Not to mention a little area separate from the kitchen to mix cocktails for guests while hosting over the holiday season!

DID YOU KNOW the perfect wine fridge temperature ranges between 50 °F (11°C) and 65 °F (18°C) for red wine and 45 °F (7°C) and 50 °F (11°C) for white wine. Neither did I, I had to look it up. Also, needing to rotate your wine bottles every few months is a total myth. As long as they are stored on their side you’re fine! Learn something new every day! Haha!

Victorian homes - toronto home renoations - restoration of victorian windows - house restoration

The plastic sheet draped over the front 2nd floor windows was becoming a huge eye sore!

Restoration of Our Original Victorian Windows

If you’re new to my channel or blog you might have been wondering why there is a big plastic bag draped across the front second floor window of our house. Well, do I have a nightmare story for you!

The evening before Adam and I were set to start drywall there was a massive rainstorm that called our attention to the badly deteriorated and rotted state of our 2nd floor windows. The water from the rainstorm was just pouring into our main floor front room and with drywall starting the next morning, we had no choice but to temporary fix it by draping a large plastic sheet of vapour barrier over the 2nd floor window as a way to keep water off of it as much as possible. This temporary solution worked very well. Amazing actually! The leaking instantly stopped but living with a large plastic sheet on the front of our house was a huge eye sore I was getting sick of looking at. So when Adam and I got back from our wedding and honeymoon, I called our carpenter and asked him to come work his magic.

Restoration of our front windows took a couple days but our carpenter quickly identify the obvious culprit. He started with removing all the rotten wood before replacing it with new wood and sealing any remaining gaps around the edges with spray foam. He did a great job replicating the original Victorian trim work and mimicking the original style just as I asked, and even primed the window with some primer paint to seal it in preparation for painting and a fresh outline of caulking.

It felts so good to not only get that plastic sheet off the front of our house but checking this off our to-do list gave me the reassurance I needed to feel confident that this window will no longer be a problem moving into the winter months.


FOLLOW ME ON INSTAGRAM @ISTHATSOH


Toronto home renovations - victorian homes - exterior house painting and restoration - victorian house gable restoration - exterior window trim painting

Giving the front of our house a little refresh!

Exterior Painting of Windows, Gable and Trim

After our carpenter wrapped up his work, Ariel and his painting crew came in to sand down and paint the front windows, gable, balcony and trim before sealing the windows off with some fresh caulking. Originally the gable, windows and trim was this dull grey colour and our front door and balcony spindles were black but none of it did anything to bring out the beautiful orange hue of the brick. I wanted something complimentary, that helped the house stand out and appear vibrant and glorious in its old age, and what better choice for that than orange’s most complimentary colour, blue! It’s my favourite colour after all!

So off I went to the paint store, with one small kitchen cabinet door tucked under my arm to find the perfect matching colour! Imagine my shock then to find out there is no Benjamin Moore colour that matches! The gentleman at the store ended up mixing the paint colour by eye and after a few small tweaks, we landed on the perfect formula! Thank god for paint snobs!

Now that the windows are restored and everything received a fresh coat of paint, the house is looking really sharp! I love how the navy blue paint accentuates the rich orange hue of the brick and how it changes colours (it sometimes almost looks black) depending on what time of day it is. To help underscore the navy blue trim we kept the front door, cast iron railing, 2nd floor balcony and eves/drain spouts black as a way to emphasize the difference in colour despite the navy appearing black at a quick glance.

Toronto home renovations - victorian homes - custom victorian stained glass window for powder room

Louis stopped by to drop off the completed stained glass window I had her custom make for my powder room!

My Custom Victorian Stained Glass Window Was Delivered!

Prior to leaving for the wedding, Louis had invited me to her studio in Etobicoke to finalize the design of the custom stained glass window she was making for the powder room. It was so cool to visit her studio and learn more about the stained glass classes she offers. The pieces she was working on for me looked incredible and exactly like the mock up design I had drawn for her months earlier. During my visit she showed me some final jewel options and glass colours she had selected, and asked me to choose what I liked the best before she began the welding phase of the production.

A few weeks later, while Ariel was still painting the house, Louis stopped by to drop off the finished stained glass window! IT LOOKED SO GOOD and I was so happy to see it installed and in all its glory in the powder room!


ENJOYING THIS CONTENT? CHECK OUT SOME OF MY OTHER EPISODES AND BLOG POSTS!


Home renovations Toronto - victorian homes - la cornue ranges - kitchen renovations toronto - herringbone floors with brass inlay - navy blue kitchen cabinets

Our La Cornue Cornufé range was finally installed!

Installation of Our La Cornue Range

It finally happened! After months of waiting for our new vent to arrive, two weeks ago we were able to get not only get it installed but we got our new La Cornue range installed too!

Originally, Adam and I had planned to have our stove installed in May when we moved in but the inspector saw the hole for the vent exhaust and said it was too big and not to code. Pivoting as best we could, we ordered a new vent that required a smaller exhaust hole but the kicker was we had to wait 16 weeks for it to arrive. In the meantime our new La Cornue stove lived in its crate in our dining room while Adam and I cooked all our meals on the BBQ.

After months of waiting our new vent arrived and we had our kitchen cabinetry maker from Domani Design Group come in to retrofit our range hood cabinet (because of course the new vent had to be a different size than our old vent) before having a professional appliance installer come in to finish the rest of the install.

By the way, if anyone is doing a kitchen renovations and needs a vent, we still have our old, unopened, Elica vent available for purchase! Model number is EAR140S4 if you want to check out the specs!

Now that our La Cornue stove is installed, Adam and I have been cooking up a storm. We love the duel electric ovens and powerful gas range. We also later learned that they discontinued making the La Cornue Cornufé range in the navy blue colour so it’s not even available for purchase anymore which makes me love it even more. I’m so excited to continue to play around with it over the holidays and feel way more confident about hosting family and friends for dinner now that we are not limited to just the BBQ. It’s going to make things so much easier and more enjoyable not to mention it looks like a piece of jewellery!

Overall, I am ECSTATIC about all the progress we’ve made on the house since moving back in. I even bought some lights on Black Friday which I can’t wait to arrive so I can install them! Christmas is also around the corner and I’m looking forward to getting our first Christmas tree and starting to host our friends and family for drinks and dinner.

Toronto home renovations - underpinning the basement - before

The current state of our basement - a sandbox!

2024 Plans: Tackling the Basement & Underpinning

In the new year Adam and I have plans to start tackling the basement which is currently a large sandbox. We want to do a big underpin in hopes of achieving an 8+ foot finished basement so it’s a bit more of a functional space and we can actually install our laundry machines (which is the last thing we need to install)! Until then they will continue taking up space in our living room. YAY! * eyeroll *

In preparation for the underpin (and before the ground froze) we had to cut away the bushes and smoke tree out front. Having to get rid of the smoke bush tree broke my heart, I loved that tree! Unfortunately it was so old, overgrown and wild that it produced less blooms each year and blocked all the light making it impossible to grow anything else. We have plans to re-landscape the front in the spring after the underpinning is done but for now we needed to prepare that front area for a demo bin.

Toronto home renovations - victorian homes - exterior window trim painting

The house after window restoration work and a fresh coat of black and navy blue paint!

Thank you so much for joining me today and for checking out my new Toronto home renovation series on Youtube. I am super excited to be modernizing a Victorian home while still keeping the charm of an old Victorian house. If you have any questions about my Victorian house renovations, what it’s like to live in Little Portugal, Toronto or recommendations for Toronto contractors, hit me up in the comments below!

Before I sign off, I’d also like to say a big thank you to Winckelmans Tiles and Deco Tile for partnering with me on this project. I’m so excited to be working with industry experts on our Toronto home renovations but want to reiterate that, like always, all opinions remain my own.

Until next time,

- Soheila

MORE BTS PHOTOS FROM THIS EPISODE


PIN THIS POST

Home renovations in Toronto - A Toronto Victorian Home - black and white victorian mosaic tiles from Winckelmans - powder room makeover

EPISODE 9: WE MOVED IN! - RENOVATING MY VICTORIAN HOME

IsThatSoh Kitchen - Victorian home with crown mouldings and castrad mercury cast iron radiator

After 14 months of renovations, we are finally ready to move back into our Toronto Victorian home!

RENOVATING MY TORONTO VICTORIAN HOME - EPISODE 9!

The moment we have all been waiting for! After 14 months of renovations, Adam and I have finally moved back into our Toronto Victorian home!

Shortly after returning from my wedding planning trip to Italy, our painter Ariel finished painting our house and packed up his stuff, which meant Adam and I could start focusing on cleaning the house and moving back in. In this episode we are going to be sharing the big reveal of our Toronto home renovation and everything we still have to do!

For those that are just tuning in, when Adam and I purchased this property as our first home, we knew it needed some work. The house had been divided into units with a ‘new-ish’ kitchen on the second floor and a very old, very small kitchen on the main floor.

Initially, Adam and I thought we would wait before doing any renovations; settle in, learn about the house, figure out its quirks, save a little money and then start the planning process. But soon after we moved in, we realized many of our appliances were broken and needed to be replaced. This ended up being the small nudge we needed to get the ball rolling. Seven months later (and just in time for Adam’s birthday), we received our building permit and were ready to get started!

P.s. If you are interested in seeing/revisiting what the house looked like prior to renovations, you can go check out my ‘pre-renovation house tour’!

moving day  - moving back into our victorian house

FOLLOW ME ON INSTAGRAM @ISTHATSOH


Before we could think about moving back into the house we first had to give it a deep clean. After 14 months of renovations, the whole house was covered in dust (especially all of the stuff we stored in the basement) so we spent the first week cleaning every nook and cranny before packing up the car with our personal stuff and finally moving back in.

HERRINGBONE FLOORING

Seeing the house sparkling clean for the first time was magical but pull up the protective ram board to reveal my new white oak herringbone flooring from Chestnut Flooring with the added brass inlay border, was a dream come true.

It had always been my fantasy to have herringbone floors so when Adam and I realized the house needed structural work to reverse the sagging on the main floor, I was ecstatic about the possibility of having to redo the floors.

Traditionally, herringbone flooring was made of hardwood oak but these days you can get them in engineered oak and they come in many different sizes and colours. Narrowing it down to the appropriate size was exceptionally hard given the size of the space. Too large and you don’t notice them, too small and it’s all you notice. In the end, Chestnut Flooring helped us find the perfect size plank and colour to add warmth back into the space. Seeing them now span all the way from the front entrance to the kitchen crittall door at the back, makes my heart skip a beat.

OUR REFURBISHED CAST IRON RADIATORS

I’ve said it once and I’ll say it a thousand more times, ornate cast iron radiators are like jewellery for you home. If you love Victorian style houses as much as I do, you would understand my desire to want to keep traditional elements like these beautiful cast iron radiators even when undergoing an extensive renovation. Not only do I think they add a pop of glam to the main floor but they work incredibly well at reducing moisture and expelling heat during colder winter months. Now, having moved back into our house I really get to enjoy the beauty of my cast iron radiators and I can’t wait to create focal points around them.

If you love Victorian homes or are just looking to refurbish your radiators, I highly recommend checking out Ironworks Radiator Inc in Etobicoke. They have an extensive stockyard of Victorian radiators located at the back of their shop and their inventory is always changing. They also work directly with Castrad Radiators in the UK to import brand new cast iron radiators in various styles including more modern, sleek silhouettes like the two we have installed under the twin windows in the kitchen.


ENJOYING THIS CONTENT? CHECK OUT SOME OF MY OTHER EPISODES AND BLOG POSTS!


home renovations in toronto - herringbone floors kitchen with brass inlay

KITCHEN RENOVATION PROGRESS & UPDATES

Progress on our kitchen renovation has unfortunately come to a halt. Right before we were set to have the stove installed (our final piece of the puzzle) the inspector looked at the vent hole and said it didn’t pass code. Little did we know before buying our hood vent that a 10 inch duct would not pass code given the parameters of our lot. The good news is, we found something that can be retrofitted to our cabinet hood but the bad news is, it could take up to 10 weeks to arrive. In the meantime, my stove lives in the dining room and Adam and I have to use the bbq to do all our cooking.

Other then that though the crown mouldings from Parsiana Design and the navy blue kitchen cabinetry from Domani Design Group look spectacular. Every time someone walks into our house they always comment on how beautiful the kitchen mouldings look against the slim shaker cabinets and how the brass inlay boarder sparkles against the the white oak herringbone flooring. I am thrilled with how the kitchen is turning out and I honestly can’t wait to see it complete once our La Cornue stove is installed.

STILL SO MUCH TO DO!

In addition to our kitchen not being completely finished, there are still so many things that need to be done around here. The bar cabinets have been measured and we are waiting delivery and install. The powered room needs to be tiled, same with the front foyer. We still need to figure out what we want to do with our fireplace. The hidden linen closet on the second floor needs to be completed. The bathroom pocket door isn’t finish being installed and trimmed out nor has the underbelly and side of our new custom staircase, but I know we will tackle these items in time so I’m not going to start sweating the small stuff.

Adam and I also have plans to start renovating the basement in the fall after our wedding, which will include some underpinning so there is definitely no shortage of work around here!

MASTER BATHROOM RENOVATION REVEAL

Inspired by the marble checkered pattern seen in the hallways of Palace of Versailles and incorporating my favourite colour blue, our master bathroom is currently our only functional bathroom. Although not honed marble like my inspiration, I just love how the blue and white checked floor tiles turned out and how well they compliment the veined porcelain slabs we chose for the shower walls. To help further pull the room together the large white oak wall mount vanity with a white quartz counter top matched our shower curb perfectly and the chrome faucets, tub filler and shower fixture turned out to be the perfect ‘polished’ detail to bring the room together.

When Adam and I first moved back into the house the shower glass wasn’t installed so we were taking a lot of baths! We also had ordered two new wall hung arched medicine cabinets for over the vanity but quickly realized they would protrude to much over the faucet to look and feel right. Thankfully I found these beautiful irregular shaped mirrors with a bevelled edge online that once installed, gave a modern twist to an otherwise traditional Victorian style bathroom.

Two weeks after we moved in, our shower glass also finally arrived. Installation took a good part of a day but I have to say it was worth the wait. The glass walls go floor to ceiling and the door swings both inward and out. We went with Chrome hardware so everything matches the newly painted cast iron tub we originally had in the basement and I really think it gives our master bathroom this feeling of grandness it was missing.

ARRIVAL OF MY MOSAIC VICTORIAN TILES!

Within the first few weeks of moving in I also received the best news! The Winckelman Tiles I had ordered had finally arrived and their local distributor here in Toronto, Deco Tile had called me to let me know I can pick them up!

The octagon mosaic Victorian tiles I had selected were even more beautiful in person! Once the car was loaded up we headed over to Deco Tile’s showroom on Tycos Drive to select the perfect grout to match. Honestly, this part was quiet challenging because so many colours would have worked well with these tiles but in the end I settled on a warm off white called Biscuit.

I can not wait to install these tiles in the powered room and front foyer and think they will really compliment the black and white custom staircase we just had installed.

Thank you so much for joining me today and for checking out my new Toronto home renovation series on YouTube. I am super excited to be modernizing a Victorian home while still keeping the charm of an old Victorian house. If you have any questions about my Victorian house renovations, what it’s like to live in Toronto or need recommendations for Toronto contractors, hit me up in the comments below!

Before I sign off, I’d also like to say a big thank you to Domani Design Group, Chestnut Flooring, Parsiena Design, Ironworks Radiator Inc and Winckelman Tiles for partnering with me on this project. I’m so excited to be working with such great companies on our Toronto home renovations but want to reiterate that, like always, all opinions remain my own.

Until next time,

- Soheila

MORE BTS PHOTOS FROM THIS EPISODE


PIN THIS POST

EPISODE 6: THE LIGHT AT THE END OF THE TUNNEL - RENOVATING MY TORONTO VICTORIAN HOME

Home renovations in Toronto - A Toronto Victorian Home - classical mouldings - plaster crown mouldings

Newly installed ornate plaster mouldings from Parsiena Design

RENOVATING MY TORONTO VICTORIAN HOME - EPISODE 6!

We are officially a month and a half into our finishes and I am already beginning to see the dream home I have been manifesting start to materialize. It’s one thing to dream and pin’ to Pinterest but now that it’s time to pull the trigger on the design elements I have been swooning over for the last year, my heart has begun to flutter with excitement watching it all come together.

Of course the finishes have come with their own set of challenges. Unlike everything that has happened up to this point, being ‘hands off’ means we’ve had to communicate very clearly and leave nothing to chance. There have been a few instances already where small assumptions have led to bigger mistakes and further work in order to correct immediately. Despite these obstacles, Adam and I continue to push our Toronto home renovation forward with bated breath, especially now that we are able to see the light at the end of the tunnel.

If this is your first time tuning into my new Toronto home renovation series and want to start from the beginning, check out Episode Episode 1: Sledgehammer Therapy and keep up with upcoming episodes by subscribing to my YouTube channel!

Since the last episode, a lot has happened at the house! Adam and I are happy to report that we passed our ‘pre-drywall’ inspection. I was so nervous for the inspection because I had to be on site by myself to answer any questions our inspector had. Thankfully I was able to calm my anxiety by keeping busy by cleaning the main floor and installing sound proofing insulation into the walls surrounding the middle bedroom on the 2nd floor.

toronto home renovations - soundproofing wall with sound batt insulation

Soundproofing the interior walls of our new second floor middle bedroom using batt sound proofing insulation

SOUNDPROOFING WALLS

Adam and I did a lot of research around soundproofing walls. Now that we had reconfigured the 2nd floor layout, adding in two new bedrooms and a bathroom, we thought it would be wise to soundproof the middle bedroom now if we hope to one day turn it into a nursery.

Although it is challenging to make a wall 100% soundproof there are a few things you can do to dampen the noise. The first thing we did was install sound proof insulation between the studs in the interior walls surrounding the middle bedroom. Given my recently acquired expertise in batt insulation (watch the last episode to find out what I mean) I was able to do this myself in just a few hours. After that, we had the drywall crew install SONOpan (soundproofing panels) prior to drywall as a way of adding an additional sound absorbing barrier between the rooms. This of course made the wall thicker, but it was a loss we were willing to accept in the name of comfort!

Home renovations in Toronto - A Toronto Victorian Home

We had to wrap the 2nd floor front window after we found a leak

WE FOUND A LEAK

Of course, nothing goes as planned when it comes to home renovations and the night before drywall was suppose to start we found a leak! There was a massive storm that night and Adam and I were at the house moving things out of the way for the drywall crew, when all of a sudden we spotted water drops coming from main floor ceiling at the the front of the house. Upon further investigation, we figured out that the leak was coming from our second floor windows and had to act quick. I ran to the basement and got a sheet of left over vapour barrier, which Adam and I used to wrap the front window and stop the leak. Thankfully our temporary solution worked and is holding up pretty well, but fixing the front windows is just one more thing to add to the list for spring.

Drywall went up pretty quick and obviously made a huge impact in making our Toronto Victorian home feel livable once again. Part way through, Adam and I did had to demo the existing stairs case and finish up the batt insulation along that wall, but other than that there wasn’t much work required for us to do at the house. Demoing the stairs did result in our basement turning into a bit of a sandbox though. Although we have no plans to start working on it now, we do plan to finish it after the work on the first and second floor is complete.

Home renovations in Toronto - A Toronto Victorian Home - ceiling medallion silicone mould replica

The first cast of the ceiling medallion Parsiana Design made from the silicone mould they created a month earlier

MY VISIT TO PARSIENA DESIGN

Since I didn’t physically have to be working at the house all day, I finally had time to turn my attention to the finishes! It had been a couple weeks since Parsiena Design had made a silicone mould of my ceiling medallion on-site, and although we had the good fortune of successfully removing the original medallion, Parsiena did make a replica using the mould and I was excited to see how it all turned out.

Located just outside Toronto in Vaughan, Parsiena Design’s production house was a feast for the eyes! Specializing in the manufacturing of architect elements, Parsiena is known as the place to go for custom fireplace mantels in Toronto. In addition to fireplace mantels, they also have a extensive catalogue of beautiful ornate plaster crown mouldings, stone range hoods, medallions, rosettes, friezes and trims. Not only can you see their work across the city of Toronto, but they have also done a lot of work internationally and in the US.

One of my favourite parts about my visit to their production studio was seeing their creative process in action! It’s not everyday an artist lets you peak behind the curtain, and I was thrilled to be invited into their workshop to see masters at work. During my visit they not only showed me the replica of my ceiling medallion, but also some beautiful stone fireplace mantels they had recently completed, I also got to see the crown moulding panels they had produced for me which were ready for install once the drywall was complete.

What do you think I should do with the replica of my ceiling medallion? Fell free to let me know in the comments below!

Home renovations in Toronto - A Toronto Victorian Home - classical mouldings - plaster crown mouldings

The plaster crown mouldings that were installed in my kitchen


FOLLOW ME ON INSTAGRAM @ISTHATSOH


Home renovations in Toronto - A Toronto Victorian Home - finished drywall-3.jpg

The main floor after drywall is complete! So excited for my new kitchen to be installed!

INTERIOR ARCHWAY

By mid January, drywall was wrapping up and the house felt completely transformed. Now that we had walls you could really feel each room beginning to take shape.

One special request I had made prior to drywall was to make an archway where our future dining room bar will be. I was really happy with how it turned out and think it created a really interesting focal point within the room.

The kitchen area also had me giddy with excitement. With the new back door letting in all this natural light, the first floor looked better than ever.

The second floor was no exception. Our new bathroom was starting to materialize nicely as well as the two new bedrooms we had framed out in the last episode.

Even the fake vent exchange I had created had been drywalled, and Adam and I reached yet another high as we took in all our accomplishments.

INSTALLATION OF OUR NEW BESPOKE STAIRCASE

With drywall behind us we could finally turn our attention to our new custom staircase!

The first part of the instillation process took two days. However, since there is still a lot of messy work to do in the house we had the carpenters hold off on installing the balusters and railing, and instead had them cover it with a protected sheet.

It’s funny to look back now and think about how much Adam and I agonized over whether or not we should replace/widen the staircase. The original staircase was so skinny and in worse for wear condition with a noticeable dip. It is common for old Toronto Victorian houses like ours to have a skinny staircase but it made it really challenging to get furniture up and down the stairs. Now with the new staircase in and the opening made wider, it seems like a no brainier decision.

More to come on this topic in a future episode!!

REINTRODUCTION OF OUR BULLNOSE CORNERS

While the stairs were being installed, we also had someone come in to reintroduce the bullnose edge detail around the fireplace that was present in the original house. You can still see it in its original plaster form on the corbel in the entrance way, but in order to reintroduce it we actually had to finish the drywall corner using a bullnose corner bead first before adding an additional layer of 1/4 inch thick drywall on top. The results were remarkable and I am so happy with how it turned out! For me, it’s the small details like this that really give a house character!

Home renovations in Toronto - A Toronto Victorian Home - classical mouldings - plaster crown mouldings and corbel

An example of an original bullnose corner that once existed in various places throughout the house.

The bullnose corner detail that we reintroduced around the fireplace mantel using a bullnose edge and additional 1/4 inch drywall


ENJOYING THIS CONTENT? CHECK OUT SOME OF MY OTHER EPISODES AND BLOG POSTS!


Home renovations in Toronto - A Toronto Victorian Home - classical mouldings - plaster crown mouldings - Parsiena Design

Installation of our new ornate plaster mouldings from Parsiena Design in our kitchen

INSTALLATION OF OUR CLASSICAL MOULDINGS

Of course, our house wouldn’t be complete without some new crown moulding from Parsiena Design. I could watch them be installed all day and never get bored. The large ornate plaster crown mouldings for the kitchen area were even more beautiful in their full format and took a master with over twenty years of experience to install. Each cut had to be made with such precision so that each corner lined up in perfect harmony and symmetry.

In the dining room and living room we went with a more understated, classic moulding design that echoed the egg and dart motif seen throughout the remaining plaster work in the house. I think the contrast in the size of the crown moulding works beautifully on the main floor because it actually makes the ceilings in the living room and dining room appear higher than the kitchen, when it fact they are slightly lower. I also love how much drama the big plaster crowns bring to the kitchen. I think if we had done them everywhere it would have been too garish and overdone so I’m really happy with my decision to just keep them in the kitchen area.

Home renovations in Toronto - A Toronto Victorian Home - classical mouldings - plaster crown mouldings and stained glass window

Halfway through our finishes! Can’t wait to see this room when it’s done!

To end off an incredibly productive week of finishes, Parsiena was also able to delivery the replicated cast and mould of my ceiling medallion and they were able to reinstall the original ceiling medallion, mending it back together piece by piece until it was hole once more. Since we had taken it down, I had some time to work on it in preparation for re-installation, and during this time I had actually discovered a whole extra layer of scalloping detail that was hidden under caulking and plaster. It was an incredible discovery which only adds to its unique character and beauty. I’m thrilled to have it back, not only in it’s rightful place but in all its grandeur.

DELIVERY OF OUR REFURBISHED CAST IRON RADIATORS

As the month came to a close, we also welcomed the delivery of our newly refurbished rads from Ironworks Radiators Inc. Although it is a little premature to install them, once the floors are done we should be close and I can’t wait to see them in their final position and glory!

More to come on this topic in the next episode! Hopefully!

UP NEXT!

Lots more exciting things to come in the next episode of our Toronto home renovation series including the installation of our beautiful herringbone floors from Chestnut Flooring, the tiling of new our master bathroom, and the installation of our custom kitchen from Domani Design Group!

Thank you so much for joining me today and for checking out my new Toronto home renovation series on Youtube. I am super excited to be modernizing a Victorian home while still keeping the charm of an old Victorian house. If you have any questions about my Victorian house renovations, what it’s like to live in Little Portugal, Toronto or recommendations for Toronto contractors, hit me up in the comments below!

Before I sign off, I’d also like to say a big thank you to Parsiena Design and Ironworks Radiator Inc. for partnering with me on this project. I’m so excited to be working with local industry experts on our Toronto home renovations but want to reiterate that, like always, all opinions remain my own.

Before I sign off, I’d also like to say a big thank you to Parsiena Design and Ironworks Radiator Inc for partnering with me on this project. I’m so excited to be working with local industry experts on our Toronto home renovations but want to reiterate that, like always, all opinions remain my own.

Until next time,

- Soheila


PIN THIS POST

EPISODE 3: SWEAT EQUITY - RENOVATING MY TORONTO VICTORIAN HOME

RENOVATING MY TORONTO VICTORIAN HOME - EPISODE 3!

When Adam and I first started talking about renovating our Toronto Victorian home, we knew we had to split it up into two phases. Phase 1 would focus on fixing the structural issues and redoing the entire main floor, while Phase 2 would focus on re-configuring the layout of the second floor and enlarging the third floor by replacing the back half of the roof with a new dormer.

What we didn’t anticipate, was how bad the condition of the main floor ceiling joists were in the back half of the house. Half didn’t span the entire width of the room, big chunks were cut out of them, and many were being held together by other, smaller, pieces of wood. We were Shoooketh!

Many of the ceiling joist on the main floor did not span the full width of the house!


FOLLOW ME ON INSTAGRAM @ISTHATSOH


Originally, we thought all we would have to do was sister each ceiling joist (to sister a joist you add an extra identical joist to the existing over-spanned, damaged or inadequate joist, and tie the two together with glue and screws (or nails) to add structural support – sounds super easy, right!?), but after the demo was completed and structural work commenced, it became obvious that there was way more work to do! For one thing, 80% of the ceiling joists needed to be replaced. In order to do that, we would need to demo whatever was above. And yes, I’m talking about the second floor!

our 2nd floor ktichen before our renovation

We had not anticipated needing to renovate the 2nd floor kitchen (above) or the 2nd floor bathroom (below)

At that time, that area of the second floor was occupied by our second floor kitchen, my little back office, and a small bathroom with a stand-up tub shower. If I’m being honest, I didn’t love the quality of the cabinetry and the ‘master bath’ left much to be desired, but we were willing to wait. True, we had no real bedrooms but we had our master and two small twin rooms on the third floor that were being used as his and her closets. The house definitely needed more bedrooms and a bathroom worthy enough to be considered a master, but still, we had a plan, two phases.

p.s. I had not taken any photos of the second floor prior to the demo, so this was all I could find. The kitchen photo is from our viewing, prior to buying the house!

I guess this is the part where I should tell you that we not only did we end up pulling the second floor into the first phase of our Toronto home renovation but we decided to do it ourselves! In episode 3 of my home renovation series I share the last two months of sweat equity Adam, his dad, and myself poured into fixing our Toronto Victorian home. In this episode, we tackle the demolition of the second floor, how we replaced each ceiling joist one by one, us installing a new levelled subfloor as well as everything that happened behind the scenes! The crucial question is, will our work pass inspection? Find out in Episode 3: Sweat Equity! Haha!

Adam and I are ready to start replacing ceiling joists!

PHOTO’S FROM OUR SECOND FLOOR DEMO!

While Adam and I were busy working on the house, a few things did happen behind the scene. For one, our appliances finally showed up along with our new natural oak herringbone floors from Chestnut Flooring.

Chestnut Flooring - Herringbone flooring companies in Toronto

Our order from Chestnut Flooring arrived! We ordered some beautiful natural oak herringbone floors for the main floor!

If anyone is in the market for flooring, I highly recommend visiting Chestnut Flooring’s showroom in Vaughan. They are a family-owned, full service (that’s right, they don’t just sell you the flooring, they will help you install it too!), one stop shop for all your flooring needs. They offer a wide range of flooring products including hardwood, engineered, laminate, carpet, vinyl and even tile from both well-known domestic and international brands.

When Adam and I first began to look for herringbone floors we visited numerous showrooms but none stood up to the quality and variety that Chestnut Flooring provided. Their engineered herringbone flooring was superior in both top layer thickness and durability which meant down the road, if we ever wanted to re-sand and re-finish the floors we could do it without issue. Of course they also offer solid hardwood floors however, given our Canadian climate, engineered hardwood flooring is better suited for herringbone oak floors. Since the core of engineered hardwood consists of 5 to 7 layers of plywood pressed together in a crisscrossed pattern, it is its construction that makes engineered hardwood flooring less likely to shift, expand or contract when exposed to environmental changes in temperature, moisture and humidity (and when it comes to specialty floors like herringbone and chevron you don’t want movement). Further, our installer who had worked with numerous types of flooring from numerous flooring companies in Toronto, independently suggested we visit their showroom and commented on how he preferred the quality of Chestnut’s flooring products over others he has worked with. So really, that sealed the deal for us! Of course, now that we are redoing the second floor we will be revisiting the Chestnut Flooring showroom to order additional flooring. Stay tuned for our selection!

OUR TORONTO HOME RENOVATIONS - BTS PHOTOS OF US REPLACING JOISTS BETWEEN THE MAIN AND SECOND FLOOR.

Additionally, Adam and I also pulled the trigger on getting two of our column radiators refurbished! Prior to the demo of the main floor, we discovered a beautiful ornate Victorian radiator in the main floor bedroom. It had been hidden behind a clunky rad cover, had not been maintained and desperately needed to be refurbished, but it was beautiful and I was ecstatic about its discovery!

Victorian Radiator repair - Ironworks pickup

Ironworks Radiator Inc picking up my Victorian radiator for refurbishment

Of course, since we were doing such a big renovation, the possibility of switching from cast iron radiators to forced air was an option but after learning more about the pros and cons of other types of central heating systems (particularly a forced air system) – like how they can collect dust and cause allergies, how the duct systems require regular cleaning, and that the furnace system serviced – central heating radiators just seemed like less yearly maintenance. Further, cast iron radiators are spectacular in moist climates such as Canada where we get tons of snow in the winter and rain in the spring. They are known for keeping basements bone dry during these months not to mention don’t require additional bulkheads like a forced air system. Lastly, they can be a beautiful showpiece (like a piece of jewellery for your home!) when refurbished and considering I am trying so hard to keep the charm of my Toronto Victorian home intact, it was an obvious choice.

In order to pass Toronto building code we would have to meet a certain BTU output, so enlisting the help of a heating experts at Ironworks Radiators Inc felt like the ideal next step.

CAST IRON RADIATOR REFERBISHMENT & REPAIR

Based in Toronto, Ironworks Radiator Inc. offers a multitude of services including consultation, radiator resizing, refurbishment (which includes custom repainting), is a supplier of radiator parts and accessories (including super fancy radiator bleeder keys), and offers pickup and delivery services. They also have a huge stockyard of rare vintage radiators to choose from and are licensed distributor for various new steel and cast iron radiator from international industry leading brands like Castrad.

Discovering Ironworks has been immensely beneficial for us. Not only were we interested in getting two column radiators refurbished, but we were in the market for an additional vintage radiators and two new custom modern radiators for under the twin windows in the kitchen. Jennifer at Ironworks was an invaluable help, organizing the pickup of our cast iron radiators for refurbishment (a rare service that many moving companies including piano moving companies won’t attempt because of how heavy they are!) and recommending new and vintage cast iron radiators to meet our BTU requirement, aesthetic and new main floor layout. She didn’t just recommend product though, she also provided a personalized consultation explaining the best course of action for the main floor given what we currently had to work with in other areas of the house. She really took the time to explain things to me as well, which I very much appreciated because I had a lot of questions! Central heating was a whole new world to me and I was on a mission to drill down and get all of the details. Our consultation of course ended with an invitation to come check out her stockyard. Inventory changes frequently in the Ironworks stockyard so who knows what rare Victorian radiator I will find when I go! I can tell you one thing for certain though, this is one treasure hunt I could not be more excited for! Stay tuned for more on this in the next episode!

If you don’t want to wait for the next episode to catch a glimpse of what is happening behind the scenes you can always follow me on Instagram where I share up-todate stories of my interior design and renovation progress!


CHECK OUT THESE OTHER HOME & LIFESTYLE BLOG POSTS


PHOTOS AFTER SISTERING AND REPLACING THE CEILING JOISTS IN OUR TORONTO VICTORIAN HOUSE

Thank you so much for joining me today and for checking out my new Toronto home renovation series on Youtube. I am super excited to be modernizing a Victorian home while still keeping the charm of an old Victorian house. If you have any questions about my Victorian house renovations, what it’s like to live in Little Portugal, Toronto or recommendations for Toronto contractors, hit me up in the comments below!

Before I sign off, I’d also like to say a big thank you to Chestnut Flooring and Ironworks Radiator Inc for partnering with us on this project. I’m so excited to be working with local industry experts on our Toronto home renovations but want to reiterate that, like always, all opinions remain my own.

Until next time,

- Soheila


PIN THIS POST!

EPISODE 2: INDESTRUCTIBLE - RENOVATING MY TORONTO VICTORIAN HOME

Toronto Victorian Ceiling Medallion

TORONTO VICTORIAN HOME RENOVATIONS

Prior to starting renovations on my Toronto Victorian home, I knew that we were going to need to do some structural work.

When we bought the house it was split into two units and there was a big bedroom located in the middle of the main floor. In order to change the layout, we were going to need to remove a load bearing wall which meant finding a structural engineer and structural contractor in Toronto.

Additionally, the staircase was original and very narrow. Its condition was worse for wear and you could clearly see it was starting to tilt to one side. Eventually, it was going to need to be replaced and if we ever wanted to get a king mattress up the stairs, increasing the size was a must.

Lastly, Adam and I also noticed that there was some serious sagging in the floors. We suspected a load bearing wall was removed in the basement and if I ever hoped to install herringbone floors, this would need to be fixed as well.

Structural work is no joke though. In Toronto, you are legally required to get a permit and getting over this hurdle meant finding a seasoned structural engineer who has had plenty of experience dealing with issues like ours as well as a structural contractor that was capable of removing walls and installing both LVLs and steel beams.


FOLLOW ME ON INSTAGRAM @ISTHATSOH


TORONTO HOME RENOVATIONS - MODERNIZING A VICTORIAN HOME

In episode two of my new home renovation series we launch right into structural work! In total we spent over a month focusing on improving the structural elements of the house including installing structural beams, sistering joists, levelling floors, adding several new footings and steel posts in the basement and installing two massive steel moment frames that pretty much make our house indestructible!

If this is your first time tuning into my new home renovation series, make sure to check out my previous episode ‘Sledgehammer Therapy’ and keep up with upcoming episodes by subscribing to my YouTube channel!

TORONTO CONTRACTORS

Our search for a good structural engineer and structural contractor in Toronto wasn’t easy. Adam and I reached out to a handful while putting together our budget for this reno and definitely ran into a few characters along the way. Finding someone ‘word of mouth’ proved challenging, especially since a lot of people we knew hadn’t taken on a renovation of this magnitude before. Since Adam and I weren’t interested in bringing on a general contractor we instead researched potential companies, looked at their reviews/references, spoke with the owners, made sure they were licensed and insured, and scheduled site visits. Even after all that, making a decision was hard and given the gravity of the ask and the money it would require, it was imperative we make the right one.

K.H. Davis Engineering Consultants LTD has a great reputation in Toronto. During our search for construction trades, Ken Davis’s name popped up a few times. A couple of them had worked with his plans before and mentioned how thorough they were. One also mentioned how responsive he was when a question arose because it saved him from delaying his project. After meeting Ken Davis himself during a site visit, we knew he was the guy we wanted to work with. He was incredibly knowledgeable, had worked on Toronto century homes before and was familiar with how they were generally constructed. He also assured us that he could address all our issues and was happy to apply for the permit and deal with the city on our behalf. When we finally pulled the trigger and started to work with him he scheduled a meeting with us to walk us through every aspect of the plans. It was clear during this meeting that he was not only taking into account what we wanted to do in this phase of our Toronto home renovations, but also our next phase which we really appreciated. Even after receiving our permit, when we hit a snag and needed to pivot, he shared a few possible solutions with us so we could figure out a financially feasible new strategy. When you are dealing with old homes, Adam and I knew that things don’t always go as planned but we both definitely appreciated having Ken by our side to guide us.

Toronto Contractors - Home renovations - dynamic design and construction

Raouf and his team at Dynamic Design and Construction - our Toronto structural contractor

Finding the right structural contractor proved even more challenging. Many of them had experience with removing a load barring wall and installing LVL’s but installing a steal beam was a whole different ball game. We needed a Toronto contractor with steel beam experience and know how.

With over 15 years in the industry Raouf has been leading his team at Dynamic Design and Construction through numerous Toronto home renovations of varying magnitudes. He has restored century homes in Rosedale, built houses from the ground up, and has plenty of experiences removing load bearing walls and installing structural steel beams like the H beams we had in our plans. Once we started to work with Dynamic, any anxiety I had going into this next step of our Toronto Victorian home renovations subsided. Raouf was great at communicating his needs, questions and concerns so that we could prepare and avoid possible upcoming challenges. His dedication to getting the job done and getting it done right was duly noted and appreciated, along with the commitment of his hard working team. I watched both moment frames get installed and moving heavy H beams into place is no easy task. Like a conductor and his orchestra, Raouf and his team worked together harmoniously, positioning and installing 7 steel beams and a steel post in one day. It was incredible!

He also levelled my floors, sistered joists, installed several footings in the basement, widened our staircase opening, poured concrete in our crawl space, created concrete footings for one of our moment frames and installed two steal frames on the foundation walls for the other. Adam and I knew it was going to be a challenging assignment and Dynamic Design and Construction rose to the occasion with total competency and professionalism.

P.s. If you are starting a Toronto home renovation and need some contractor recommendations Adam and I have put together a stellar list of contractors and tradesman for this project! I’ll be sharing more about our renovation process in upcoming episodes and the companies we are using but if you can’t wait, feel free to leave a comment below or shoot me an email via my contact form for a recommendation!

Dynamic Desing and Construction - Toronto Home Renovation Contractors

Roufe and his team celebrating after installing 6 steel beams that make up the two moment frames we needed to install in our Toronto Victorian home.


CHECK OUT THESE OTHER HOME & LIFESTYLE BLOG POSTS


soheila hakimi of isthatsoh

Me after another day of home renovations!

So there you have it! Stage two of our Toronto home renovations is complete and we can now move onto the next step, framing, plumbing and electrical work.

While the structural work was going on we also finally receive our kitchen appliances (including our new La Cornue range) and finalized our new kitchen designs with Domani Design Group. Everything we are going to be doing in our Toronto home renovation moving forward will be preparing us for the install of our new kitchen, a large Crittall style back door and a whole new main floor layout! Plus I have some BIG NEWS which I will be revealing in my next episode, so don’t miss out and subscribe!

Additionally, behind the scenes I also started my search for tiles to replace the ones we had in our basement bathroom as well as demoed the area around our staircase, cleaned up the mechanical room and removed a large old decommissioned cast iron stack from the side of the house. If you want to see more behind the scenes you can always follow me on Instagram where I share more up to date stories of my interior design and renovation progress!

PICTURES FROM AFTER THE STRUCTURAL WORK HAS BEEN COMPLETE IN MY TORONTO HOME RENOVATIONS!


Thank you so much for joining me today and for checking out my new Toronto home renovation series on Youtube. I am super excited to be modernizing a Victorian home while still keeping the charm of an old Victorian house. If you have any questions about my Victorian house renovations, what it’s like to live in Little Portugal, Toronto or recommendations for Toronto contractors, hit me up in the comments below!

monarch butterfly

PIN THIS POST