EPISODE 9: WE MOVED IN! - RENOVATING MY VICTORIAN HOME

IsThatSoh Kitchen - Victorian home with crown mouldings and castrad mercury cast iron radiator

After 14 months of renovations, we are finally ready to move back into our Toronto Victorian home!

RENOVATING MY TORONTO VICTORIAN HOME - EPISODE 9!

The moment we have all been waiting for! After 14 months of renovations, Adam and I have finally moved back into our Toronto Victorian home!

Shortly after returning from my wedding planning trip to Italy, our painter Ariel finished painting our house and packed up his stuff, which meant Adam and I could start focusing on cleaning the house and moving back in. In this episode we are going to be sharing the big reveal of our Toronto home renovation and everything we still have to do!

For those that are just tuning in, when Adam and I purchased this property as our first home, we knew it needed some work. The house had been divided into units with a ‘new-ish’ kitchen on the second floor and a very old, very small kitchen on the main floor.

Initially, Adam and I thought we would wait before doing any renovations; settle in, learn about the house, figure out its quirks, save a little money and then start the planning process. But soon after we moved in, we realized many of our appliances were broken and needed to be replaced. This ended up being the small nudge we needed to get the ball rolling. Seven months later (and just in time for Adam’s birthday), we received our building permit and were ready to get started!

P.s. If you are interested in seeing/revisiting what the house looked like prior to renovations, you can go check out my ‘pre-renovation house tour’!

moving day  - moving back into our victorian house

FOLLOW ME ON INSTAGRAM @ISTHATSOH


Before we could think about moving back into the house we first had to give it a deep clean. After 14 months of renovations, the whole house was covered in dust (especially all of the stuff we stored in the basement) so we spent the first week cleaning every nook and cranny before packing up the car with our personal stuff and finally moving back in.

HERRINGBONE FLOORING

Seeing the house sparkling clean for the first time was magical but pull up the protective ram board to reveal my new white oak herringbone flooring from Chestnut Flooring with the added brass inlay border, was a dream come true.

It had always been my fantasy to have herringbone floors so when Adam and I realized the house needed structural work to reverse the sagging on the main floor, I was ecstatic about the possibility of having to redo the floors.

Traditionally, herringbone flooring was made of hardwood oak but these days you can get them in engineered oak and they come in many different sizes and colours. Narrowing it down to the appropriate size was exceptionally hard given the size of the space. Too large and you don’t notice them, too small and it’s all you notice. In the end, Chestnut Flooring helped us find the perfect size plank and colour to add warmth back into the space. Seeing them now span all the way from the front entrance to the kitchen crittall door at the back, makes my heart skip a beat.

OUR REFURBISHED CAST IRON RADIATORS

I’ve said it once and I’ll say it a thousand more times, ornate cast iron radiators are like jewellery for you home. If you love Victorian style houses as much as I do, you would understand my desire to want to keep traditional elements like these beautiful cast iron radiators even when undergoing an extensive renovation. Not only do I think they add a pop of glam to the main floor but they work incredibly well at reducing moisture and expelling heat during colder winter months. Now, having moved back into our house I really get to enjoy the beauty of my cast iron radiators and I can’t wait to create focal points around them.

If you love Victorian homes or are just looking to refurbish your radiators, I highly recommend checking out Ironworks Radiator Inc in Etobicoke. They have an extensive stockyard of Victorian radiators located at the back of their shop and their inventory is always changing. They also work directly with Castrad Radiators in the UK to import brand new cast iron radiators in various styles including more modern, sleek silhouettes like the two we have installed under the twin windows in the kitchen.


ENJOYING THIS CONTENT? CHECK OUT SOME OF MY OTHER EPISODES AND BLOG POSTS!


home renovations in toronto - herringbone floors kitchen with brass inlay

KITCHEN RENOVATION PROGRESS & UPDATES

Progress on our kitchen renovation has unfortunately come to a halt. Right before we were set to have the stove installed (our final piece of the puzzle) the inspector looked at the vent hole and said it didn’t pass code. Little did we know before buying our hood vent that a 10 inch duct would not pass code given the parameters of our lot. The good news is, we found something that can be retrofitted to our cabinet hood but the bad news is, it could take up to 10 weeks to arrive. In the meantime, my stove lives in the dining room and Adam and I have to use the bbq to do all our cooking.

Other then that though the crown mouldings from Parsiana Design and the navy blue kitchen cabinetry from Domani Design Group look spectacular. Every time someone walks into our house they always comment on how beautiful the kitchen mouldings look against the slim shaker cabinets and how the brass inlay boarder sparkles against the the white oak herringbone flooring. I am thrilled with how the kitchen is turning out and I honestly can’t wait to see it complete once our La Cornue stove is installed.

STILL SO MUCH TO DO!

In addition to our kitchen not being completely finished, there are still so many things that need to be done around here. The bar cabinets have been measured and we are waiting delivery and install. The powered room needs to be tiled, same with the front foyer. We still need to figure out what we want to do with our fireplace. The hidden linen closet on the second floor needs to be completed. The bathroom pocket door isn’t finish being installed and trimmed out nor has the underbelly and side of our new custom staircase, but I know we will tackle these items in time so I’m not going to start sweating the small stuff.

Adam and I also have plans to start renovating the basement in the fall after our wedding, which will include some underpinning so there is definitely no shortage of work around here!

MASTER BATHROOM RENOVATION REVEAL

Inspired by the marble checkered pattern seen in the hallways of Palace of Versailles and incorporating my favourite colour blue, our master bathroom is currently our only functional bathroom. Although not honed marble like my inspiration, I just love how the blue and white checked floor tiles turned out and how well they compliment the veined porcelain slabs we chose for the shower walls. To help further pull the room together the large white oak wall mount vanity with a white quartz counter top matched our shower curb perfectly and the chrome faucets, tub filler and shower fixture turned out to be the perfect ‘polished’ detail to bring the room together.

When Adam and I first moved back into the house the shower glass wasn’t installed so we were taking a lot of baths! We also had ordered two new wall hung arched medicine cabinets for over the vanity but quickly realized they would protrude to much over the faucet to look and feel right. Thankfully I found these beautiful irregular shaped mirrors with a bevelled edge online that once installed, gave a modern twist to an otherwise traditional Victorian style bathroom.

Two weeks after we moved in, our shower glass also finally arrived. Installation took a good part of a day but I have to say it was worth the wait. The glass walls go floor to ceiling and the door swings both inward and out. We went with Chrome hardware so everything matches the newly painted cast iron tub we originally had in the basement and I really think it gives our master bathroom this feeling of grandness it was missing.

ARRIVAL OF MY MOSAIC VICTORIAN TILES!

Within the first few weeks of moving in I also received the best news! The Winckelman Tiles I had ordered had finally arrived and their local distributor here in Toronto, Deco Tile had called me to let me know I can pick them up!

The octagon mosaic Victorian tiles I had selected were even more beautiful in person! Once the car was loaded up we headed over to Deco Tile’s showroom on Tycos Drive to select the perfect grout to match. Honestly, this part was quiet challenging because so many colours would have worked well with these tiles but in the end I settled on a warm off white called Biscuit.

I can not wait to install these tiles in the powered room and front foyer and think they will really compliment the black and white custom staircase we just had installed.

Thank you so much for joining me today and for checking out my new Toronto home renovation series on YouTube. I am super excited to be modernizing a Victorian home while still keeping the charm of an old Victorian house. If you have any questions about my Victorian house renovations, what it’s like to live in Toronto or need recommendations for Toronto contractors, hit me up in the comments below!

Before I sign off, I’d also like to say a big thank you to Domani Design Group, Chestnut Flooring, Parsiena Design, Ironworks Radiator Inc and Winckelman Tiles for partnering with me on this project. I’m so excited to be working with such great companies on our Toronto home renovations but want to reiterate that, like always, all opinions remain my own.

Until next time,

- Soheila

MORE BTS PHOTOS FROM THIS EPISODE


PIN THIS POST

EPISODE 6: THE LIGHT AT THE END OF THE TUNNEL - RENOVATING MY TORONTO VICTORIAN HOME

Home renovations in Toronto - A Toronto Victorian Home - classical mouldings - plaster crown mouldings

Newly installed ornate plaster mouldings from Parsiena Design

RENOVATING MY TORONTO VICTORIAN HOME - EPISODE 6!

We are officially a month and a half into our finishes and I am already beginning to see the dream home I have been manifesting start to materialize. It’s one thing to dream and pin’ to Pinterest but now that it’s time to pull the trigger on the design elements I have been swooning over for the last year, my heart has begun to flutter with excitement watching it all come together.

Of course the finishes have come with their own set of challenges. Unlike everything that has happened up to this point, being ‘hands off’ means we’ve had to communicate very clearly and leave nothing to chance. There have been a few instances already where small assumptions have led to bigger mistakes and further work in order to correct immediately. Despite these obstacles, Adam and I continue to push our Toronto home renovation forward with bated breath, especially now that we are able to see the light at the end of the tunnel.

If this is your first time tuning into my new Toronto home renovation series and want to start from the beginning, check out Episode Episode 1: Sledgehammer Therapy and keep up with upcoming episodes by subscribing to my YouTube channel!

Since the last episode, a lot has happened at the house! Adam and I are happy to report that we passed our ‘pre-drywall’ inspection. I was so nervous for the inspection because I had to be on site by myself to answer any questions our inspector had. Thankfully I was able to calm my anxiety by keeping busy by cleaning the main floor and installing sound proofing insulation into the walls surrounding the middle bedroom on the 2nd floor.

toronto home renovations - soundproofing wall with sound batt insulation

Soundproofing the interior walls of our new second floor middle bedroom using batt sound proofing insulation

SOUNDPROOFING WALLS

Adam and I did a lot of research around soundproofing walls. Now that we had reconfigured the 2nd floor layout, adding in two new bedrooms and a bathroom, we thought it would be wise to soundproof the middle bedroom now if we hope to one day turn it into a nursery.

Although it is challenging to make a wall 100% soundproof there are a few things you can do to dampen the noise. The first thing we did was install sound proof insulation between the studs in the interior walls surrounding the middle bedroom. Given my recently acquired expertise in batt insulation (watch the last episode to find out what I mean) I was able to do this myself in just a few hours. After that, we had the drywall crew install SONOpan (soundproofing panels) prior to drywall as a way of adding an additional sound absorbing barrier between the rooms. This of course made the wall thicker, but it was a loss we were willing to accept in the name of comfort!

Home renovations in Toronto - A Toronto Victorian Home

We had to wrap the 2nd floor front window after we found a leak

WE FOUND A LEAK

Of course, nothing goes as planned when it comes to home renovations and the night before drywall was suppose to start we found a leak! There was a massive storm that night and Adam and I were at the house moving things out of the way for the drywall crew, when all of a sudden we spotted water drops coming from main floor ceiling at the the front of the house. Upon further investigation, we figured out that the leak was coming from our second floor windows and had to act quick. I ran to the basement and got a sheet of left over vapour barrier, which Adam and I used to wrap the front window and stop the leak. Thankfully our temporary solution worked and is holding up pretty well, but fixing the front windows is just one more thing to add to the list for spring.

Drywall went up pretty quick and obviously made a huge impact in making our Toronto Victorian home feel livable once again. Part way through, Adam and I did had to demo the existing stairs case and finish up the batt insulation along that wall, but other than that there wasn’t much work required for us to do at the house. Demoing the stairs did result in our basement turning into a bit of a sandbox though. Although we have no plans to start working on it now, we do plan to finish it after the work on the first and second floor is complete.

Home renovations in Toronto - A Toronto Victorian Home - ceiling medallion silicone mould replica

The first cast of the ceiling medallion Parsiana Design made from the silicone mould they created a month earlier

MY VISIT TO PARSIENA DESIGN

Since I didn’t physically have to be working at the house all day, I finally had time to turn my attention to the finishes! It had been a couple weeks since Parsiena Design had made a silicone mould of my ceiling medallion on-site, and although we had the good fortune of successfully removing the original medallion, Parsiena did make a replica using the mould and I was excited to see how it all turned out.

Located just outside Toronto in Vaughan, Parsiena Design’s production house was a feast for the eyes! Specializing in the manufacturing of architect elements, Parsiena is known as the place to go for custom fireplace mantels in Toronto. In addition to fireplace mantels, they also have a extensive catalogue of beautiful ornate plaster crown mouldings, stone range hoods, medallions, rosettes, friezes and trims. Not only can you see their work across the city of Toronto, but they have also done a lot of work internationally and in the US.

One of my favourite parts about my visit to their production studio was seeing their creative process in action! It’s not everyday an artist lets you peak behind the curtain, and I was thrilled to be invited into their workshop to see masters at work. During my visit they not only showed me the replica of my ceiling medallion, but also some beautiful stone fireplace mantels they had recently completed, I also got to see the crown moulding panels they had produced for me which were ready for install once the drywall was complete.

What do you think I should do with the replica of my ceiling medallion? Fell free to let me know in the comments below!

Home renovations in Toronto - A Toronto Victorian Home - classical mouldings - plaster crown mouldings

The plaster crown mouldings that were installed in my kitchen


FOLLOW ME ON INSTAGRAM @ISTHATSOH


Home renovations in Toronto - A Toronto Victorian Home - finished drywall-3.jpg

The main floor after drywall is complete! So excited for my new kitchen to be installed!

INTERIOR ARCHWAY

By mid January, drywall was wrapping up and the house felt completely transformed. Now that we had walls you could really feel each room beginning to take shape.

One special request I had made prior to drywall was to make an archway where our future dining room bar will be. I was really happy with how it turned out and think it created a really interesting focal point within the room.

The kitchen area also had me giddy with excitement. With the new back door letting in all this natural light, the first floor looked better than ever.

The second floor was no exception. Our new bathroom was starting to materialize nicely as well as the two new bedrooms we had framed out in the last episode.

Even the fake vent exchange I had created had been drywalled, and Adam and I reached yet another high as we took in all our accomplishments.

INSTALLATION OF OUR NEW BESPOKE STAIRCASE

With drywall behind us we could finally turn our attention to our new custom staircase!

The first part of the instillation process took two days. However, since there is still a lot of messy work to do in the house we had the carpenters hold off on installing the balusters and railing, and instead had them cover it with a protected sheet.

It’s funny to look back now and think about how much Adam and I agonized over whether or not we should replace/widen the staircase. The original staircase was so skinny and in worse for wear condition with a noticeable dip. It is common for old Toronto Victorian houses like ours to have a skinny staircase but it made it really challenging to get furniture up and down the stairs. Now with the new staircase in and the opening made wider, it seems like a no brainier decision.

More to come on this topic in a future episode!!

REINTRODUCTION OF OUR BULLNOSE CORNERS

While the stairs were being installed, we also had someone come in to reintroduce the bullnose edge detail around the fireplace that was present in the original house. You can still see it in its original plaster form on the corbel in the entrance way, but in order to reintroduce it we actually had to finish the drywall corner using a bullnose corner bead first before adding an additional layer of 1/4 inch thick drywall on top. The results were remarkable and I am so happy with how it turned out! For me, it’s the small details like this that really give a house character!

Home renovations in Toronto - A Toronto Victorian Home - classical mouldings - plaster crown mouldings and corbel

An example of an original bullnose corner that once existed in various places throughout the house.

The bullnose corner detail that we reintroduced around the fireplace mantel using a bullnose edge and additional 1/4 inch drywall


ENJOYING THIS CONTENT? CHECK OUT SOME OF MY OTHER EPISODES AND BLOG POSTS!


Home renovations in Toronto - A Toronto Victorian Home - classical mouldings - plaster crown mouldings - Parsiena Design

Installation of our new ornate plaster mouldings from Parsiena Design in our kitchen

INSTALLATION OF OUR CLASSICAL MOULDINGS

Of course, our house wouldn’t be complete without some new crown moulding from Parsiena Design. I could watch them be installed all day and never get bored. The large ornate plaster crown mouldings for the kitchen area were even more beautiful in their full format and took a master with over twenty years of experience to install. Each cut had to be made with such precision so that each corner lined up in perfect harmony and symmetry.

In the dining room and living room we went with a more understated, classic moulding design that echoed the egg and dart motif seen throughout the remaining plaster work in the house. I think the contrast in the size of the crown moulding works beautifully on the main floor because it actually makes the ceilings in the living room and dining room appear higher than the kitchen, when it fact they are slightly lower. I also love how much drama the big plaster crowns bring to the kitchen. I think if we had done them everywhere it would have been too garish and overdone so I’m really happy with my decision to just keep them in the kitchen area.

Home renovations in Toronto - A Toronto Victorian Home - classical mouldings - plaster crown mouldings and stained glass window

Halfway through our finishes! Can’t wait to see this room when it’s done!

To end off an incredibly productive week of finishes, Parsiena was also able to delivery the replicated cast and mould of my ceiling medallion and they were able to reinstall the original ceiling medallion, mending it back together piece by piece until it was hole once more. Since we had taken it down, I had some time to work on it in preparation for re-installation, and during this time I had actually discovered a whole extra layer of scalloping detail that was hidden under caulking and plaster. It was an incredible discovery which only adds to its unique character and beauty. I’m thrilled to have it back, not only in it’s rightful place but in all its grandeur.

DELIVERY OF OUR REFURBISHED CAST IRON RADIATORS

As the month came to a close, we also welcomed the delivery of our newly refurbished rads from Ironworks Radiators Inc. Although it is a little premature to install them, once the floors are done we should be close and I can’t wait to see them in their final position and glory!

More to come on this topic in the next episode! Hopefully!

UP NEXT!

Lots more exciting things to come in the next episode of our Toronto home renovation series including the installation of our beautiful herringbone floors from Chestnut Flooring, the tiling of new our master bathroom, and the installation of our custom kitchen from Domani Design Group!

Thank you so much for joining me today and for checking out my new Toronto home renovation series on Youtube. I am super excited to be modernizing a Victorian home while still keeping the charm of an old Victorian house. If you have any questions about my Victorian house renovations, what it’s like to live in Little Portugal, Toronto or recommendations for Toronto contractors, hit me up in the comments below!

Before I sign off, I’d also like to say a big thank you to Parsiena Design and Ironworks Radiator Inc. for partnering with me on this project. I’m so excited to be working with local industry experts on our Toronto home renovations but want to reiterate that, like always, all opinions remain my own.

Before I sign off, I’d also like to say a big thank you to Parsiena Design and Ironworks Radiator Inc for partnering with me on this project. I’m so excited to be working with local industry experts on our Toronto home renovations but want to reiterate that, like always, all opinions remain my own.

Until next time,

- Soheila


PIN THIS POST

EPISODE 5: THE BIG PUSH - RENOVATING MY TORONTO VICTORIAN HOME

The silicone mold made by Parsiena Design of my Victorian ceiling medallion

RENOVATING MY TORONTO VICTORIAN HOME - EPISODE 5!

For me, 2022 was a year of firsts. First time doing a home renovation. First time gutting a house. First time demolishing a wall, removing flooring, widening a staircase, doing structural work of any kind, and yet here we are!

A year ago, all the work we have done would have been outside my scope of knowledge. It’s amazing what you can accomplish with a good team of people by your side and I feel so blessed to have worked with such great crews on this project. I am so proud of all that we have accomplished together and without them I would have never gotten this far. So before I kick off this episode, I just want to acknowledge everyone who has supported me and this home renovation series thus far. Without you, it would never have worked and we would never have gotten this far. Thank you for one of the best years of my life. ♡

If this is your first time tuning into my new home renovation series and want to start from the beginning, check out Episode 1: Sledgehammer Therapy and keep up with upcoming episodes by subscribing to my YouTube channel!

Since the last episode, lots has happened at the house! At the end of summer, Adam and I had our roof redone! With five layers of shingles, including the original cedar shingles, the front half of our roof was in rough shape.

Our roof was in serious rough shape before we had it redone!

ROOF REPAIRS & MAINTENANCE

It’s unclear when the previous owners did something to the roof but judging from the state of it, it would only be a matter of time before it would become an issue. The peak was deteriorating and you could see a depression where the old chimney stack used to be. Considering how much effort and money we had already put into this project, we weren’t willing to take the risk of going through another winter without making sure it was sealed tight.

The whole process of removing shingles, repairing any rotten areas, waterproofing, and laying down new shingles took two days. Adding back the eves and aluminum capping took an additional few days but for the most part it was fairly painless.

The worst thing about getting your roof redone is all the debris. I had to make sure it all landed in my front lawn and didn’t damage my neighbours property. At the end of the job I made sure the crew took extra time to clean their properties and they did do a pretty good job. It’s been really nice getting to know my neighbours over the past year and a half (can you believe it’s been that long since we bought our first home) and it’s nice to see that everyone really looks out for one another. One of my neighbours has a snowblower and always does the sidewalks for us. Another always gives us grapes from their garden. Having great neighbours is gift and I lucked out with a bunch of beauties.

One unfortunate outcome that did occur from my roof being redone, was that our smoke bush took a major hit. Despite having cut it back, all the debris that was coming off the roof was falling on the smoke bush causing it to lose entire branches. I had neglected it over the summer and by September it was out of control. I noticed it didn’t flower very well this summer and my mom’s friend who is a horticulturalist advised me to prune it back. I guess the roofers kind of did it for me but I love that smoke bush and really hope it makes an awesome come back next summer.


FOLLOW ME ON INSTAGRAM @ISTHATSOH


STRUCTURAL ENGINEER

Soon after the roof was finished we heard back from our residential structural engineer, K.H. Davis Engineering Consultants LTD who provided us with plans for the second floor.

When I first realized we would have to do structural work on the 2nd floor, my heart dropped. I was so worried about how long it would take and how much it would delay our plans. Turns out, when compared to the work we had already done it wasn’t going to be as complicated or extensive, which came as a huge relief. The new plans required us to install 4 new LVL beams (laminated veneer lumber) which we were confident we could do ourselves, and took us just over a week to complete.

Gearing up to install our fist LVL beam on the 2nd floor. Supports are up and the boys are already removing the top plate.

Most of the work was similar to what we had already done, except the first beam we installed actually had to be built in the air because it was so heavy! We would never have been able to lift it into place, and so we had to lift each piece it into position and connect them all once elevated. After that first massive LVL beam, things got easier. We built the beams on the floor and alleviated some of the lifts with a ‘ladder method’ I once saw our amazing residential structural contractor Raouf use in the basement with a steal beam.

Shout out to Raouf at Dynamic Design and Construction, we miss you and the crew!! We would have never gotten this far without you!!!

The last two beams were pretty simple to install and, much like we had done with the staircase header and floor joists, we connected all the joists that run perpendicular to the beam using joist hangers.

Once all the structural work was complete, Adam and I felt very accomplished. It’s crazy to think a year ago we had no structural or renovation experience whatsoever and here we are building our house from the inside out!

Parsiena Design in the process of making a silicone mold of my ceiling medallion!

MAKING A SILICONE MOLD OF MY CEILING MEDALLION

I know by now you must be thinking ‘Jeeze, this girl and her ceiling medallion’ (I know Adam is), but the original moldings and character of the house was a huge part of what made me fall in love with it in the first place. When Adam told me we would have to level the ceiling in the living room I protested, worried about damaging the almost 150 year old plaster ceiling medallion. I wouldn’t let them touch it without me first finding a solution to either remove it or have it replicated. Enter Parsiena Designs.

Parsiena Designs is one of Canada’s leading manufacturers of stone mantels and architectural elements. I first discovered Parsiena on Instagram and really wanted to work with them. They have a large catalogue full of beautiful medallions, friezes, trims, casing, panels and plaster crown mouldings, and I ended up picking one of their larger, more intricate crown molding designs for my kitchen! For the rest of the main floor, I chose another one of their more simple crown moulding designs, an egg and dart motif which echos the original plaster work found throughout the house.

I also learned that they can do plaster replication. I was so scared of what was going to happen to my ceiling medallion when we would inevitably have to take it down, and I thought a mold of it would be great ‘insurance’. In addition to the ceiling medallion, I also got the door crowns reproduced.

I am so excited to be partnering with Parsiena Designs on this project and can’t wait to see what the house looks like with my new crown mouldings! I think it’s going to really elevate the main floor and allow me to stay true to the original Victorian aesthetic while also providing the flexibility to modernize it.

After the mold was made, we miraculously removed the ceiling medallion. I was so nervous the entire time despite having a mold, but was still determined to do whatever I could to save it (the original is always better after all). Two hours and a miracle later we managed to get it down safely using a drywall lift, a foam pad (used to absorb some of the vibrations), a crowbar, and lots of patience. We were all surprised to learn in the process that it was actually 5 separate pieces instead of just one large piece and although one of the side pieces broke, I knew it was easily reparable and was so thrilled with the outcome.


ENJOYING THIS CONTENT? CHECK OUT SOME OF MY OTHER EPISODES AND DIY’S!


Renovating my victorian home - cast iron radiators - Ironworks radiators - painting a radiator

My newly refurbished, cast iron Victorian radiator being painted at Ironworks Radiator Inc.

PAINTING MY VICTORIAN CAST IRON RADIATORS

Remember this beauty? I first spotted her last summer while treasure hunting in the Ironworks stockyard.

Well in November I received a call from Jennifer at Ironworks Radiator Inc who told me that the ornate Victorian radiators I had purchased from her for refurbishment had been sandblasted and primed, and were ready for painting. It took me weeks to pick colours, but I finally landed on brass for the dining room and an antique bronze for the front foyer. I think both colours will go well with our incoming natural oak herringbone floors and french navy blue cabinetry as well as the brass hardware in the kitchen and the modern Castrad Radiators in bronze gold that arrived at the end of the summer.

I really love the look of ornate cast iron Victorian radiators. To me they are like jewellery, but for your home. Not only are they eye-catching but depending on the colours you pick, they can totally add a pop of glamour to a room. I just loved how these turned out and I can’t wait to have them installed in my home! Which colour is your favourite? Feel free to leave your answer in the comments below!

Framing the 2nd floor - pictured here 2nd and 3rd bedroom

FRAMING THE SECOND FLOOR


Once all the structural work was done on the second floor we could immediately start framing. Besides building the bulk heads on the main floor and one wall, Adam and I didn’t really have a lot of framing experience. Thankfully, Adam’s dad was able to lead the charge and show us how. Within a week we had the new second floor layout entirely framed out. Instead of having only one bedroom on the second floor we now had three and we were able to move the bathroom across the house so it could eventually act as a shared master ensuite.

Overall, the framing was easy and uneventful except for the fact that the new layout I had originally planned for was a little tighter than expected in reality. After mapping out the space, Adam and I realized that the closet necessary to house the laundry machines would have eaten up to much space into bedroom 2 causing it to be significantly smaller than bedroom 3. Adam was also worried about future repairs and having to move them around in such a small space so we both agreed that the easiest and best solution was just to have a laundry area down stairs in the basement for now and keep the bedrooms fairly similar in size. The small space we had left over will now become a ‘hidden’ linen closet - a project I’m excited to work on when we we move onto finishing.

Once all the framing was done we could finally start having all the other trades come through to install plumbing, electrical and heating. The last two weeks in November were crazy! Not only were the other trades able to get all the ‘guts’ in the house done, but we passed inspection and had our new window and back Crittall door installed!

INSTILLATION OF OUR NEW WINDOWS & CRITTALL DOOR

New windows have arrived (early too) and are being installed along with my new Crittall door .

The long awaited arrival of our back door finally happened! Adam and I originally placed our custom order for a new back door in the spring, expecting it to arrive mid summer. Here we were, well into fall, the weather is getting cold and I was super cheesed about how long it was taking. When our new Crittall door finally showed up I was still kind of sour, but what I didn’t know was that the manufacturer had sped up our window order which we had only placed a month prior (which wasn’t suppose to arrive until February) and the whole thing was getting installed in the same day. My whole mood did a 180°! All was forgiven and I was happy as a clam once again.

Plus our new Crittall door turned out amazing! Adam and I put a lot of effort into calculating the perfect glass size ratios for the opening and once it was installed, it was obvious all our hard work had paid off.

The ornate cast iron Victorian vent exchange I used to hide some water pipes with the help of some fancy carpentry work.

A LITTLE FANCY CARPENTRY

One small solo project I took on that I feel so proud about arose after our plumber Steve unknowingly hit a floor joist while running new water lines to the second floor. Having nowhere to go but around the joist and up, I had an opportunity to get creative with some fancy carpentry. Luckily, prior to the demo I made sure to save a few things that were part of the original house like this old vent exchange. I didn’t have any ideas as to what I would eventually use it for but clearly I’m a hoarder of old things and when this situation arose, I finally had the perfect reason to upcycle it. My background in design really came in handy for this little project and I was pretty proud of how it all turned out. All I had to do was build a box that could attach to the wall and be dry-walled in to look like it was meant to be there. The vent would fit inside it, blocking the lines while still making them accessible. Pretty cool, right?

Still smiling despite being incredibly itchy from all the Batt insulation work I’m doing

SPRAY FOAM INSULATION & MY DEAL WITH ADAM

In our relationship, Adam is definitely the spreadsheet guy. He’s the one who organizes our renovations expenses and makes sure we stay on budget. If I spring things on him like wanting new crown mouldings for the main floor, a compromise needs to be made. When planning for this home renovation we had set aside money for Batt insulation but was unaware that we would 1) have to use closed cell spray foam insulation on the 2nd floor ceiling because it is a flat roof (our inspector told us this) and 2) how costly replicating a ceiling medallion and putting in new crown mouldings would be.

So to help make room in the budget for these items, I told Adam I would do all the Batt insulation work myself. Boy did I have my work cut out for me. I had no idea how long it would take or how itchy Batt insulation makes my skin but I really wanted those crown mouldings so a deal was a deal. Although doing Batt insulation work is very easy, to do both floors took me more than a month because I could only do it in piece meal and only after the other trades were finished running electrical lines, PEX, and plumbing in those areas. By the end of it, I was so sick of dealing with insulation and being itchy all the time but I managed to get it all done and saved us a few thousand dollars.

When it comes to closed cell spray foam insulation you want to make sure you hire a trained professional with certified qualifications. Although a popular insulation method and one required by the Toronto Building Code for all non-vented roofs, if not done correctly you could experience toxic off-gassing. For this reason, we originally wanted to use Batt insulation everywhere but after our inspector informed us of the code, we had to compromise and do the 2nd floor ceiling. Thankfully, we were able to find a qualified company with great reviews to do it for us, but it did take some time and a lot of questioning. During our search though we did encounter a few shady companies, which is why I just wanted to take a moment to reiterate the importance of choosing a company wisely.

If you don’t want to wait for the next episode to catch a glimpse of what is happening behind the scenes you can always follow me on Instagram where I share up-to-date stories of my interior design and renovation progress!

Winter has arrived! First snowfall of the year!

Thank you so much for joining me today and for checking out my new Toronto home renovation series on Youtube. I am super excited to be modernizing a Victorian home while still keeping the charm of an old Victorian house. If you have any questions about my Victorian house renovations, what it’s like to live in Little Portugal, Toronto or recommendations for Toronto contractors, hit me up in the comments below!

Before I sign off, I’d also like to say a big thank you to Parsiena Design and Ironworks Radiator Inc for partnering with me on this project. I’m so excited to be working with local industry experts on our Toronto home renovations but want to reiterate that, like always, all opinions remain my own.

Until next time,

- Soheila

MORE BTS PHOTOS FROM THIS EPISODE


PIN THIS POST!

renovating my toronto victorian home - Victorian homes

EPISODE 3: SWEAT EQUITY - RENOVATING MY TORONTO VICTORIAN HOME

RENOVATING MY TORONTO VICTORIAN HOME - EPISODE 3!

When Adam and I first started talking about renovating our Toronto Victorian home, we knew we had to split it up into two phases. Phase 1 would focus on fixing the structural issues and redoing the entire main floor, while Phase 2 would focus on re-configuring the layout of the second floor and enlarging the third floor by replacing the back half of the roof with a new dormer.

What we didn’t anticipate, was how bad the condition of the main floor ceiling joists were in the back half of the house. Half didn’t span the entire width of the room, big chunks were cut out of them, and many were being held together by other, smaller, pieces of wood. We were Shoooketh!

Many of the ceiling joist on the main floor did not span the full width of the house!


FOLLOW ME ON INSTAGRAM @ISTHATSOH


Originally, we thought all we would have to do was sister each ceiling joist (to sister a joist you add an extra identical joist to the existing over-spanned, damaged or inadequate joist, and tie the two together with glue and screws (or nails) to add structural support – sounds super easy, right!?), but after the demo was completed and structural work commenced, it became obvious that there was way more work to do! For one thing, 80% of the ceiling joists needed to be replaced. In order to do that, we would need to demo whatever was above. And yes, I’m talking about the second floor!

our 2nd floor ktichen before our renovation

We had not anticipated needing to renovate the 2nd floor kitchen (above) or the 2nd floor bathroom (below)

At that time, that area of the second floor was occupied by our second floor kitchen, my little back office, and a small bathroom with a stand-up tub shower. If I’m being honest, I didn’t love the quality of the cabinetry and the ‘master bath’ left much to be desired, but we were willing to wait. True, we had no real bedrooms but we had our master and two small twin rooms on the third floor that were being used as his and her closets. The house definitely needed more bedrooms and a bathroom worthy enough to be considered a master, but still, we had a plan, two phases.

p.s. I had not taken any photos of the second floor prior to the demo, so this was all I could find. The kitchen photo is from our viewing, prior to buying the house!

I guess this is the part where I should tell you that we not only did we end up pulling the second floor into the first phase of our Toronto home renovation but we decided to do it ourselves! In episode 3 of my home renovation series I share the last two months of sweat equity Adam, his dad, and myself poured into fixing our Toronto Victorian home. In this episode, we tackle the demolition of the second floor, how we replaced each ceiling joist one by one, us installing a new levelled subfloor as well as everything that happened behind the scenes! The crucial question is, will our work pass inspection? Find out in Episode 3: Sweat Equity! Haha!

Adam and I are ready to start replacing ceiling joists!

PHOTO’S FROM OUR SECOND FLOOR DEMO!

While Adam and I were busy working on the house, a few things did happen behind the scene. For one, our appliances finally showed up along with our new natural oak herringbone floors from Chestnut Flooring.

Chestnut Flooring - Herringbone flooring companies in Toronto

Our order from Chestnut Flooring arrived! We ordered some beautiful natural oak herringbone floors for the main floor!

If anyone is in the market for flooring, I highly recommend visiting Chestnut Flooring’s showroom in Vaughan. They are a family-owned, full service (that’s right, they don’t just sell you the flooring, they will help you install it too!), one stop shop for all your flooring needs. They offer a wide range of flooring products including hardwood, engineered, laminate, carpet, vinyl and even tile from both well-known domestic and international brands.

When Adam and I first began to look for herringbone floors we visited numerous showrooms but none stood up to the quality and variety that Chestnut Flooring provided. Their engineered herringbone flooring was superior in both top layer thickness and durability which meant down the road, if we ever wanted to re-sand and re-finish the floors we could do it without issue. Of course they also offer solid hardwood floors however, given our Canadian climate, engineered hardwood flooring is better suited for herringbone oak floors. Since the core of engineered hardwood consists of 5 to 7 layers of plywood pressed together in a crisscrossed pattern, it is its construction that makes engineered hardwood flooring less likely to shift, expand or contract when exposed to environmental changes in temperature, moisture and humidity (and when it comes to specialty floors like herringbone and chevron you don’t want movement). Further, our installer who had worked with numerous types of flooring from numerous flooring companies in Toronto, independently suggested we visit their showroom and commented on how he preferred the quality of Chestnut’s flooring products over others he has worked with. So really, that sealed the deal for us! Of course, now that we are redoing the second floor we will be revisiting the Chestnut Flooring showroom to order additional flooring. Stay tuned for our selection!

OUR TORONTO HOME RENOVATIONS - BTS PHOTOS OF US REPLACING JOISTS BETWEEN THE MAIN AND SECOND FLOOR.

Additionally, Adam and I also pulled the trigger on getting two of our column radiators refurbished! Prior to the demo of the main floor, we discovered a beautiful ornate Victorian radiator in the main floor bedroom. It had been hidden behind a clunky rad cover, had not been maintained and desperately needed to be refurbished, but it was beautiful and I was ecstatic about its discovery!

Victorian Radiator repair - Ironworks pickup

Ironworks Radiator Inc picking up my Victorian radiator for refurbishment

Of course, since we were doing such a big renovation, the possibility of switching from cast iron radiators to forced air was an option but after learning more about the pros and cons of other types of central heating systems (particularly a forced air system) – like how they can collect dust and cause allergies, how the duct systems require regular cleaning, and that the furnace system serviced – central heating radiators just seemed like less yearly maintenance. Further, cast iron radiators are spectacular in moist climates such as Canada where we get tons of snow in the winter and rain in the spring. They are known for keeping basements bone dry during these months not to mention don’t require additional bulkheads like a forced air system. Lastly, they can be a beautiful showpiece (like a piece of jewellery for your home!) when refurbished and considering I am trying so hard to keep the charm of my Toronto Victorian home intact, it was an obvious choice.

In order to pass Toronto building code we would have to meet a certain BTU output, so enlisting the help of a heating experts at Ironworks Radiators Inc felt like the ideal next step.

CAST IRON RADIATOR REFERBISHMENT & REPAIR

Based in Toronto, Ironworks Radiator Inc. offers a multitude of services including consultation, radiator resizing, refurbishment (which includes custom repainting), is a supplier of radiator parts and accessories (including super fancy radiator bleeder keys), and offers pickup and delivery services. They also have a huge stockyard of rare vintage radiators to choose from and are licensed distributor for various new steel and cast iron radiator from international industry leading brands like Castrad.

Discovering Ironworks has been immensely beneficial for us. Not only were we interested in getting two column radiators refurbished, but we were in the market for an additional vintage radiators and two new custom modern radiators for under the twin windows in the kitchen. Jennifer at Ironworks was an invaluable help, organizing the pickup of our cast iron radiators for refurbishment (a rare service that many moving companies including piano moving companies won’t attempt because of how heavy they are!) and recommending new and vintage cast iron radiators to meet our BTU requirement, aesthetic and new main floor layout. She didn’t just recommend product though, she also provided a personalized consultation explaining the best course of action for the main floor given what we currently had to work with in other areas of the house. She really took the time to explain things to me as well, which I very much appreciated because I had a lot of questions! Central heating was a whole new world to me and I was on a mission to drill down and get all of the details. Our consultation of course ended with an invitation to come check out her stockyard. Inventory changes frequently in the Ironworks stockyard so who knows what rare Victorian radiator I will find when I go! I can tell you one thing for certain though, this is one treasure hunt I could not be more excited for! Stay tuned for more on this in the next episode!

If you don’t want to wait for the next episode to catch a glimpse of what is happening behind the scenes you can always follow me on Instagram where I share up-todate stories of my interior design and renovation progress!


CHECK OUT THESE OTHER HOME & LIFESTYLE BLOG POSTS


PHOTOS AFTER SISTERING AND REPLACING THE CEILING JOISTS IN OUR TORONTO VICTORIAN HOUSE

Thank you so much for joining me today and for checking out my new Toronto home renovation series on Youtube. I am super excited to be modernizing a Victorian home while still keeping the charm of an old Victorian house. If you have any questions about my Victorian house renovations, what it’s like to live in Little Portugal, Toronto or recommendations for Toronto contractors, hit me up in the comments below!

Before I sign off, I’d also like to say a big thank you to Chestnut Flooring and Ironworks Radiator Inc for partnering with us on this project. I’m so excited to be working with local industry experts on our Toronto home renovations but want to reiterate that, like always, all opinions remain my own.

Until next time,

- Soheila


PIN THIS POST!

HOME SWEET HOME - A PRE RENO HOUSE TOUR!

Welcome To My New Victorian House!

This past August was a whirlwind of a month to say the least! My fiance and I got back from our trip to Powell River only to celebrate my birthday and take possession of our new house all in the same day! It took us a good three days to get all of our stuff into the new place (with a lot of unexpected surprises along the way), but we are finally here!

I honestly could not be more thrilled to share my new house journey with you, but if you are new and are just tuning in now, this new chapter has been almost a year in the making. I vividly remember last September when Adam (my boyfriend at the time) and I deciding to sell my condo and start looking for a house together. I had just spent the entire summer at his family cottage and loved having the extra living space to enjoy. The idea of returning to condo life in a city still under COVID restrictions felt very daunting and I knew one day soon I wanted to find a house in the city instead. Little did I know, selling my condo was going to be even more challenging than I anticipated!

If you’re in a similar life stage as me, you may have already started paying attention to the real estate market. Perhaps you are thinking it’s a great way to invest you money and want a place to call your own - which it is - but since the beginning of the pandemic, the real estate market has been going crazy in big cities like Toronto. Condo’s have seen huge fluctuations in demand and value. Further, home prices have skyrocketed thanks to low interest rates and a lack of supply. Needless to say, what I thought would be a quick transaction turned into a few months of my condo being on the market before I accepted an offer I was happy with.


FOLLOW ME ON INSTAGRAM @ISTHATSOH


The next phase of actually buying a house did not get any easier. Between skyrocketing prices, shady antics from agents, and lack of supply, it took us 4-5 months of searching, over 50 viewings, and 11 offers before we won a bid. If you’re looking to start your own house hunting journey soon, you should read my recent blog post about tips for first time home buyers on how to psychologically prepare. It was a really tough process for me - harder then I ever imagined - but I’m happy to say now it was worth the sweat, mental frustration, and tears because in the end I landed a beautiful home that is beyond anything I imagined I would end up with and I can’t wait to share it with you!

Since starting our house hunting journey a lot has also happened in my personal life including getting engaged to my boyfriend at the end of May. A few weeks later, we visited this beautiful Victorian style house in one of the most coveted neighborhoods in downtown Toronto and I instantly fell in love. The house is over 125 years old, and had so much original character, putting in an offer was a no brainier.

One of the first things that caught my eye was the beautifully arched brick entrance way! You could tell that the front of the house had been landscaped recently with a cobble stone pathway and large stone slab stairs, not to mention it was hard to miss the glorious smoke bush tree out front that provides a bit of privacy to anyone sitting in the front living room. It felt like it could be a scene from a movie - one where a young couple runs up to the front archway trying to duck out of the rain right before one of them gets the courage to lean in and steal their first kiss. Can you see it? Haha!

Perhaps it’s the romantic in me but the love affair with this house didn’t stop at the front door. The house also featured so much original molding and stain glass that I instantly became smitten.

Prior to even starting our house hunt in Toronto I had always loved old homes. Downtown Toronto is full of old homes and Victorian style houses are definitely my favorite, but unfortunately as we learned, a lot of them are not being very well taken care of, and the ones that are have lost a lot of their original charms due to updates/renovation. 90% of what we saw during our house hunting journey were that Victorian house style and I think at one point I started to drive my boyfriend nuts because I wouldn’t budge on what I wanted. But there is no denying the beauty of a Victorian home! Especially ones still full of original character! It’s rare, trust me I’ve looked! Lesson being, I am so glad I stuck to my guns!


ENJOYING THIS POST? CHECK OUT SOME OF MY OTHER LIFESTYLE POSTS!


As I walked through the house, my romantic entanglement only grew. The front living room definitely became (and still is) my favorite room in the entire house as it feature so much original Victorian house interior character and a beautiful stain glass motif! In the morning, warm light shines through the window and casts large rainbows of light on the walls inside! There is something very bright and airy about the space that always gives me really good vibes anytime I spend time in here. Since moving in, it has definitely become the room I enjoy working from the most - as a matter of fact, I am writing this very blog post from it now!

Even though we fell in love with the house after only one visit, we do have plans to do some renovations to it. Since the house is actually broken up into two units (check out the video below for the full tour) we originally planned on renting half of it out to Adam’s brother. As fate would have it (and unexpected issues with the house and our ‘new’ appliances) we decided to push up the renovations and start them this fall. Don’t worry, we are keeping as much of the original Victorian charm as we can!

Turning our house back into a single family home is going to be a lot of work but I’m really looking forward to starting renovations in a few months and putting in my dream kitchen. Before we start the renovations though, I wanted to do a quick home tour with you so you can see the canvas I am working with. In this video I will be walking you through my downtown Toronto Victorian house as well as giving you a little sneak peek on what we are planning on changing.


I hope you fell in love with the house as much as I did when I first saw it. If you have any questions or comments about this video, feel free to leave them down below!

I'm also going to be creating a lot of new content around my new home (renovations, home DIY's, and sharing about my interior decorating journey) so if you are interested in following along, feel free to subscribe to my YouTube channel or follow me on Instagram @IsThatSoh!


MORE FUN VIDEOS FROM OUR ‘FIRST TIME HOME BUYER’ JOURNEY IN TORONTO!


PIN THIS BLOG POST!