EPISODE 11: UNDERPINNING OUR BASEMENT - RENOVATING MY VICTORIAN HOME

Toronto home renovations - renovating a victorian home - navy kitchen with slim shaker cabinets and la cornue range - la cornue kitchens

Lots of progress has been made sine our last episode including the completion of our navy blue kitchen renovation!

Renovating my Toronto Victorian Home - Episode 11!

What a trip around the sun it has been! This time last year Adam and I were nearing the end of our Toronto home renovations and putting the finishing touches on our Toronto Victorian home. Since then we have moved in, planned our destination wedding, and got married in Tuscany at the beautiful Abbazia di San Galgano Abbey before jetting off on our Croatia honeymoon.

To add a cherry on the figurative cake, Adam and I came back from our honeymoon to find out I was pregnant!

It was a little to early to share our big news with everyone here and on social media, and with Christmas around the corner, we decided to wait to tell our families first before sharing this amazing news with all you.

With that being said, this new discovery motivated us to start preparing for phase 3 (the final phase of our home renovation) - basement underpinning!

home renovation in Toronto - renovating a victorian home - basement underpinning and basement waterproofing toronto - toronto blogs

We had to clear the front yard of our house (which included the removal of our beloved smoke bush) to prepare for phase 3 of our renovation, underpinning the basement. Don’t worry, I have plans to bring the smoke bush back!

What is underpinning?

Underpinning a house is when you reinforce or strengthen the foundation’s structure by excavating small, spread-out, portioned-out sections, before filling them back in with concrete. House underpinning can be required for a number of reason like:

  1. When the original foundation is no longer strong enough to hold the house and is in need of serious repair.

  2. If you want to increase the capacity of the existing foundation to support another story.

  3. To dig out the basement so as to lower the basement floor and achieve a higher ceiling height (as in our case).

How much does basement underpinning cost?

The cost of underpinning varies depending on the state of your current foundation walls, the square footage of your basement, how deep you want to go with the underpin/how much you want to lower your basement floor and how much additional work (i.e. waterproofing, installing radiant floors, main drain replacement/lower, additional plumbing rough-ins) is required.

We received a range of quotes for our basement between $55,000 - $80,000 but in generally, it is said that you should budget for $80 a square foot (as an average) to underpin and dig out your basement two feet.

In order to set ourselves up for success the first thing we needed to do was call our Toronto structural engineer Ken Davis. Having previously worked with K H Davis Engineering on the first two phases of our Victorian home renovation, we knew he was the perfect man for the job.

Toronto blog - home renovation in Toronto - basement renovations toronto - basement underpinning foundation - site visit by Toronto Structural engineer Ken Davis

Our Toronto Structural Engineer Ken Davis doing a site inspection during the underpinning of our basement.

Since 1999 Ken has worked on over 3000 residential projects and has a great reputation for helping homeowners and contractors alike achieve their design and renovation goals. From new builds to additions, laneway home and garden suits, K H Davis Engineering can do it all. He has also worked on many century homes in Toronto, including many Victorian homes like ours, which has provided him with a knowledge base we are always keen to leverage.

A couple site visits and a few measurements later, we were well on our way to finalizing revised plans! In the meantime, we had enough ironed our to start reaching out to contractors that specialize in basement underpinning and waterproofing in Toronto to solicit quotes.


FOLLOW ME ON INSTAGRAM @ISTHATSOH


Toronto home renovations - renovating a victorian home - floating shelves with lights - navy kitchen with slim shaker cabinets and la cornue range - la cornue kitchens

Our kitchen from Domani Design Group is finally complete after the installation of our range vent cover and under floating shelf lighting!

As we waited for underpinning quotes to trickle in, we were able to turn our attention over to finishing off the kitchen.

Since the last episode of our home renovation series we still had two items to check off before the kitchen was FINALLY finished. The first was get our electrician back in to install the last of the lights, and the second was to install the range vent cover. Thankfully we were able to complete both items with a month to spare before Christmas which meant Adam and I could get familiar with our new stove and practice our menu before hosting our family and friends for Christmas dinner. Having now spent a few months putting it to the test, Adam and I are so happy with our kitchen from Domani Design Group. Not only is it beautiful, but very well made. Every door and cabinet is soft close, I have more storage than I know what to do with, the layout is designed with functionality in mind and we absolutely love how much counter space we have!

Needless to say, celebrating our first Christmas at home was absolutely magical. Adam and I splurged on a 9 foot Fraser Fir and rented tables and chairs for our 20 person Christmas dinner. Not only were we able to show off our newly renovated house for the first time to many of our family members, but we were also able to share our pregnancy news with them, which made the whole season even more enchanting.

Following the holiday season, we received a call from our structural engineer Ken Davis to discuss our architectural drawings for the basement. It was concluded after a soil test that we would need to take a hybrid approach to our basement renovation that would involve underpinning about 75% of our basement and bench footing the remaining 25%. Given the sandy consistency of our basement and the fact that our neighbours house on one side is only 6 inches away (and their basement was slighting shorter than our current basement), there was a concern that underpinning that 25% section could undermine our neighbours foundation wall. To ensure everyone’s safety and the integrity of both houses, going with a hybrid underpinning and bench footing approach was the best option.

What is bench footing?


Unlike underpinning where you have to dig under the foundation wall, a bench footing is another way to support a foundation wall and lower the floor in your basement by creating a ledge or ‘bench’ out of concrete that sits along the existing wall. The downside to a bench footing approach is that it encroaches on your usable space. In our case, we have plans to build storage cabinets over-top of our bench footing as a way to not only hide the bench but make use of the space above it.

In addition to the hybrid underpinning / bench footing approach we also decided to turn one of the existing windows into an egress window. This would allow us to have a safety exit, should we ever need it and although we don’t have plans to rent out the basement or put a permanent bedroom down there, it’s good to have in case of an emergency. Given we are in the midst of doing a big renovation as well, there is probably no better time than now to action installing one.

What is a basement Egress window?

A basement Egress window provides a quick and safe emergency exit for your home, and an unobstructed opening from which someone can escape from. This means that a window, large enough for a human body to fit through (see Egress Window Size specifications based on your municipality code) must be able to open from the inside so that an escape can be made via an Egress window well or clearing in front of the window.

Once we were all in agreement regarding the best course of action, Ken was able to submit our architectural drawings to the city and get us our permit within two week! Remarkable!

Toronto blogs - Renovating a victorian home - Toronto home renovations - Basement Renovations and underpinning a house by ICYReno to lower floor in basement - basement waterproofing contractor Toronto

Allow me to introduce our Toronto Basement Underpinning & Waterproofing Contractor - ICYReno! #Partner

Meet our Toronto Basement Underpinning & Waterproofing Contractor

As we waited for our underpinning permit to be approved, Adam and I settled on an underpinning and basement waterproofing contractor in Toronto. Enter ICYReno, a fully insured and licensed waterproofing and underpinning company with over 10 years of experience. Not only have they helped homeowners across the GTA lower their basement floor but they are pros when it comes to interior and exterior waterproofing, back water valve and sump pump installation, drainage systems, concrete work, and more. They also came with an impressive endorsement from our structural engineer who had overseen a few of the basement underpins they had worked on in the past and was impressed by their quality of work. And if that wasn’t enough to seal the deal, their price was also one of the most competitive!

Within a week of receiving our permit, ICYReno began work on our basement. Before they could begin underpinning the foundation, they first had to demo the remaining drywall, stripping back all the layers until it was bare bones. Once complete they divided up the basement into small sections and began excavating and reinforcing each section, pouring new concrete footings before moving on.

Now, two weeks into our Toronto basement renovation it’s clear that ICYReno not only runs a tight ship with well organized bin drop offs and concrete pouring schedules, but their crew is highly trained and hard working. Having completed 50% of the underpin in just two weeks, it’s clear that they need no micro managing and can take care of everything from scheduling site visits with our structural engineer Ken Davis to booking appointments and sharing progress photos with our city inspector. They also sometimes work on Saturday, and given that I’m currently 7 months pregnant and ICYReno promised a 4-6 week timeline for completion, I appreciate their outstanding work ethic! Time is of the essence after all and at this rate they may even be done early! *fingers crossed*


ENJOYING THIS CONTENT? CHECK OUT SOME OF MY PREVIOUS EPISODES & BLOG POSTS!


Meanwhile, I have been gathering inspiration for the basement. Given that we have to move our upstairs office into the basement to make room for our future nursery, we plan to divide the basement up into three major sections, a closed off front office that could double as a spill over bedroom should we need it, a larger open concept recreational room with a wet bar and perhaps a small play area where we can attempt to keep all the kids toys contained, and a conjoined bathroom-laundry room at the back where we can finally install our washer and dryer (which have been sitting in our living room for almost a year now)! YAY!

FUTURE FINISHED BASEMENT INSPIRATION

A few additional things we were able to check off our ‘To Do’ list since the last episode was install some new light fixtures on the main floor, finish off the powder room, make progress on the upstairs hidden linen closet and order new windows for the basement.

Next up on our list of things to tackle: prep the nursery for the baby’s arrival (I have plans to install a feature mural on one wall and paint the other walls), finish the underpinning, rough-in drains for the basement bathroom/laundry room and wet bar, install weeping tile and complete interior basement waterproofing, install radiant floors, dig and landscape for a new basement egress window, pour a new concrete slab floor and install a new basement egress window. Hopefully while this is all happening I can also source some tiles for our future basement bathroom!

Toronto blogs - Renovating a victorian home - Toronto home renovations - Basement Renovations and underpinning a house by ICYReno to lower floor in basement - basement waterproofing contractor Toronto

Basement renovation in progress….

Although Adam and I are not putting any pressure on ourselves to finish the basement before the baby arrives, it would be nice to have it as a functional space to work from and do laundry in. As much as I love visiting my parents every weekend to do laundry, it’s only going to get tougher once a newborn is in the picture. Anyways, that is all I have to share with you in this episode and blog post. If you have any questions about renovating a Victorian home, what it’s like to live in Toronto or need recommendations for Toronto contractors, hit me up in the comments below!

Before I sign off, I’d also like to say a big thank you to K H Davis Engineering and ICYReno for partnering with me on this project. I’m so excited to be working with such reputable companies on our Toronto basement renovations but want to reiterate that, like always, all opinions remain my own.

Until next time,
- Soheila



MORE BTS PHOTOS FROM THIS EPISODE


PIN THIS POST

Home renovations in Toronto - A Toronto Victorian Home - kitchen renvovation reveal and underpinning foundation in basement

EPISODE 9: WE MOVED IN! - RENOVATING MY VICTORIAN HOME

IsThatSoh Kitchen - Victorian home with crown mouldings and castrad mercury cast iron radiator

After 14 months of renovations, we are finally ready to move back into our Toronto Victorian home!

RENOVATING MY TORONTO VICTORIAN HOME - EPISODE 9!

The moment we have all been waiting for! After 14 months of renovations, Adam and I have finally moved back into our Toronto Victorian home!

Shortly after returning from my wedding planning trip to Italy, our painter Ariel finished painting our house and packed up his stuff, which meant Adam and I could start focusing on cleaning the house and moving back in. In this episode we are going to be sharing the big reveal of our Toronto home renovation and everything we still have to do!

For those that are just tuning in, when Adam and I purchased this property as our first home, we knew it needed some work. The house had been divided into units with a ‘new-ish’ kitchen on the second floor and a very old, very small kitchen on the main floor.

Initially, Adam and I thought we would wait before doing any renovations; settle in, learn about the house, figure out its quirks, save a little money and then start the planning process. But soon after we moved in, we realized many of our appliances were broken and needed to be replaced. This ended up being the small nudge we needed to get the ball rolling. Seven months later (and just in time for Adam’s birthday), we received our building permit and were ready to get started!

P.s. If you are interested in seeing/revisiting what the house looked like prior to renovations, you can go check out my ‘pre-renovation house tour’!

moving day  - moving back into our victorian house

FOLLOW ME ON INSTAGRAM @ISTHATSOH


Before we could think about moving back into the house we first had to give it a deep clean. After 14 months of renovations, the whole house was covered in dust (especially all of the stuff we stored in the basement) so we spent the first week cleaning every nook and cranny before packing up the car with our personal stuff and finally moving back in.

HERRINGBONE FLOORING

Seeing the house sparkling clean for the first time was magical but pull up the protective ram board to reveal my new white oak herringbone flooring from Chestnut Flooring with the added brass inlay border, was a dream come true.

It had always been my fantasy to have herringbone floors so when Adam and I realized the house needed structural work to reverse the sagging on the main floor, I was ecstatic about the possibility of having to redo the floors.

Traditionally, herringbone flooring was made of hardwood oak but these days you can get them in engineered oak and they come in many different sizes and colours. Narrowing it down to the appropriate size was exceptionally hard given the size of the space. Too large and you don’t notice them, too small and it’s all you notice. In the end, Chestnut Flooring helped us find the perfect size plank and colour to add warmth back into the space. Seeing them now span all the way from the front entrance to the kitchen crittall door at the back, makes my heart skip a beat.

OUR REFURBISHED CAST IRON RADIATORS

I’ve said it once and I’ll say it a thousand more times, ornate cast iron radiators are like jewellery for you home. If you love Victorian style houses as much as I do, you would understand my desire to want to keep traditional elements like these beautiful cast iron radiators even when undergoing an extensive renovation. Not only do I think they add a pop of glam to the main floor but they work incredibly well at reducing moisture and expelling heat during colder winter months. Now, having moved back into our house I really get to enjoy the beauty of my cast iron radiators and I can’t wait to create focal points around them.

If you love Victorian homes or are just looking to refurbish your radiators, I highly recommend checking out Ironworks Radiator Inc in Etobicoke. They have an extensive stockyard of Victorian radiators located at the back of their shop and their inventory is always changing. They also work directly with Castrad Radiators in the UK to import brand new cast iron radiators in various styles including more modern, sleek silhouettes like the two we have installed under the twin windows in the kitchen.


ENJOYING THIS CONTENT? CHECK OUT SOME OF MY OTHER EPISODES AND BLOG POSTS!


home renovations in toronto - herringbone floors kitchen with brass inlay

KITCHEN RENOVATION PROGRESS & UPDATES

Progress on our kitchen renovation has unfortunately come to a halt. Right before we were set to have the stove installed (our final piece of the puzzle) the inspector looked at the vent hole and said it didn’t pass code. Little did we know before buying our hood vent that a 10 inch duct would not pass code given the parameters of our lot. The good news is, we found something that can be retrofitted to our cabinet hood but the bad news is, it could take up to 10 weeks to arrive. In the meantime, my stove lives in the dining room and Adam and I have to use the bbq to do all our cooking.

Other then that though the crown mouldings from Parsiana Design and the navy blue kitchen cabinetry from Domani Design Group look spectacular. Every time someone walks into our house they always comment on how beautiful the kitchen mouldings look against the slim shaker cabinets and how the brass inlay boarder sparkles against the the white oak herringbone flooring. I am thrilled with how the kitchen is turning out and I honestly can’t wait to see it complete once our La Cornue stove is installed.

STILL SO MUCH TO DO!

In addition to our kitchen not being completely finished, there are still so many things that need to be done around here. The bar cabinets have been measured and we are waiting delivery and install. The powered room needs to be tiled, same with the front foyer. We still need to figure out what we want to do with our fireplace. The hidden linen closet on the second floor needs to be completed. The bathroom pocket door isn’t finish being installed and trimmed out nor has the underbelly and side of our new custom staircase, but I know we will tackle these items in time so I’m not going to start sweating the small stuff.

Adam and I also have plans to start renovating the basement in the fall after our wedding, which will include some underpinning so there is definitely no shortage of work around here!

MASTER BATHROOM RENOVATION REVEAL

Inspired by the marble checkered pattern seen in the hallways of Palace of Versailles and incorporating my favourite colour blue, our master bathroom is currently our only functional bathroom. Although not honed marble like my inspiration, I just love how the blue and white checked floor tiles turned out and how well they compliment the veined porcelain slabs we chose for the shower walls. To help further pull the room together the large white oak wall mount vanity with a white quartz counter top matched our shower curb perfectly and the chrome faucets, tub filler and shower fixture turned out to be the perfect ‘polished’ detail to bring the room together.

When Adam and I first moved back into the house the shower glass wasn’t installed so we were taking a lot of baths! We also had ordered two new wall hung arched medicine cabinets for over the vanity but quickly realized they would protrude to much over the faucet to look and feel right. Thankfully I found these beautiful irregular shaped mirrors with a bevelled edge online that once installed, gave a modern twist to an otherwise traditional Victorian style bathroom.

Two weeks after we moved in, our shower glass also finally arrived. Installation took a good part of a day but I have to say it was worth the wait. The glass walls go floor to ceiling and the door swings both inward and out. We went with Chrome hardware so everything matches the newly painted cast iron tub we originally had in the basement and I really think it gives our master bathroom this feeling of grandness it was missing.

ARRIVAL OF MY MOSAIC VICTORIAN TILES!

Within the first few weeks of moving in I also received the best news! The Winckelman Tiles I had ordered had finally arrived and their local distributor here in Toronto, Deco Tile had called me to let me know I can pick them up!

The octagon mosaic Victorian tiles I had selected were even more beautiful in person! Once the car was loaded up we headed over to Deco Tile’s showroom on Tycos Drive to select the perfect grout to match. Honestly, this part was quiet challenging because so many colours would have worked well with these tiles but in the end I settled on a warm off white called Biscuit.

I can not wait to install these tiles in the powered room and front foyer and think they will really compliment the black and white custom staircase we just had installed.

Thank you so much for joining me today and for checking out my new Toronto home renovation series on YouTube. I am super excited to be modernizing a Victorian home while still keeping the charm of an old Victorian house. If you have any questions about my Victorian house renovations, what it’s like to live in Toronto or need recommendations for Toronto contractors, hit me up in the comments below!

Before I sign off, I’d also like to say a big thank you to Domani Design Group, Chestnut Flooring, Parsiena Design, Ironworks Radiator Inc and Winckelman Tiles for partnering with me on this project. I’m so excited to be working with such great companies on our Toronto home renovations but want to reiterate that, like always, all opinions remain my own.

Until next time,

- Soheila

MORE BTS PHOTOS FROM THIS EPISODE


PIN THIS POST

EPISODE 7: A DATE WITH DESTINY - RENOVATING MY VICTORIAN HOME

home renovations in Toronto - install herringbone flooring with brass inlay from chestnut flooring

Installation in progress! My white oak herringbone dreams are about to come true!

RENOVATING MY TORONTO VICTORIAN HOME - EPISODE 7!

It’s been yet another busy month at the house as we power through more of the finishes. Following the delivery of our refurbished cast iron radiators from Ironworks Radiator Inc and the installation of our classical mouldings from Parsiena Design, Adam and I felt ready to take on the next stage of our Toronto Victorian home renovation, the flooring.

If you have been following my home renovation series for awhile, you may remember me spilling the tea on all my juicy home renovation plans. For those who are new, it has been a dream of mine to have herringbone floors! When Adam and I purchased this property as our first home together, one of the things that I was thrilled about was how old the floors were - odd I know but here me out. Down the line, I knew we would eventually do some renovations to our Victorian home, and when that time came, redoing the subfloor and installing new flooring would be a top priority. In the meantime, I made sure to plant the seed of herringbone floors in Adam’s mind by sharing interior inspiration with him on the regular. Little did I know my dreams were going to come true sooner than I had imagined!

It wasn’t long after Adam and I moved in that we noticed a few things were not as they seemed. Many of our appliances were not working and needed to be fixed, and since they were old to begin with, we debated whether that was even worth doing. In the end, the debate around fixing the appliances escalated into buying them which again escalated into widening the staircase (because 'how would we fit the washer and dryer upstairs otherwise’). All this turned out to be just the thing we needed to get the ball rolling and start planning our Toronto home renovation.

Having big dreams of what I wanted the floors to look like presented a few challenges for me. Victorian homes in Toronto tend to be long and narrow, and I wanted the pattern to be prominent and repeat several times across the width of the house. In order to achieve this look I required a smaller, skinnier plank size. Finding this very specific thing was not easy. Most suppliers I found carried a ‘standard size’ of 4-5 inch wide herringbone planks while I was looking for something slightly smaller in the 3-3.5 inch range. At one point I got so desperate, I called a restaurant with ‘skinny’ herringbone floors that had just opened to find out where they got theirs! It took me a few weeks and visits to numerous showrooms, not to mention ordering samples online from supplier in the US, to find the perfect product - but I found it!

home renovations in Toronto - install herringbone flooring with brass inlay from chestnut flooring - fireplace and ceiling medallion with egg and dart crown mouldings

The living room in my Toronto Victorian home is beginning to shape up really nicely!

CHESTNUT FLOORING #PARTNER

It was a sunny, fall Saturday when Adam and I drove out to Vaughan to visit Chestnut Flooring’s showroom. A long time Instagram follower of mine who also happened to be a flooring installer suggested I check out their showroom after seeing my stories and learning about my herringbone aspirations. Having installed many different brands of herringbone flooring in the Toronto area himself, he remarked at the quality of their engineered herringbone floors - and he was right. Chestnut Flooring not only had the size and colour we wanted, but it turned out that when compared to the other samples I had collected, their engineered herringbone floor product had a superior top wood layer/thickness. This meant if we ever wanted to refinish the floors down the line or needed to fade out a big scratch (knock on wood that never happens), we had the ability to sand them down and do just that! Perfect, right!?

We ended up having such a great experience working with Chestnut Flooring’s co-owner and showroom manager, Sherry, the first time around that as we progressed into our renovations and realized we would have to pull the second floor (phase 2) into the initial phase of our renovation they were the only showroom we needed to visit to source additional flooring. Not only do they offer a wide selection of products from both well-known domestic and international brands, including hardwood, engineered, laminate, carpet, vinyl and tile, but Sherry was able to find a match for our second floor that we just loved! A red oak, straight plank, solid hardwood that adds both warmth and durability to the second floor.


FOLLOW ME ON INSTAGRAM @ISTHATSOH


Part of my big herringbone design dream was to incorporate a boarder with brass inlay. Luckily, a week before installation I was able to find a supplier in the Toronto area but since it was going to take a few days to arrive, we ended up starting the installation on the second floor.

The flooring installation on the second floor went quick and took maybe two days. The red oak hardwood floors from Chestnut Flooring look so warm and inviting. You can really see the natural beauty of the grain when the afternoon sun shines into the room. Adam and I ended up getting enough material for both of the back bedrooms and the 2nd floor hallway. We do have big plans to tile our new bathroom but that will have to wait for another episode!

Just as we wrapped up the second floor installation the brass inlay arrived. I was so excited that my dream was becoming real right before my eyes that I stayed and watched the process. My flooring installer did such a great job incorporating the border inlay and really took his time polishing the brass before installation. He even kindly made two examples for me of how the corners could be done so I could feel confident with my choice. After a week, my date with destiny was upon me! The white oak herringbone floors were fully installed and looking even better then I could have imagined.

CABINETRY HARDWARE AND STAINED GLASS WINDOWS

While the flooring was being installed I was also able to finalize my kitchen cabinetry hardware and begin working on a design for a stained glass window in our main floor powder room. The window in the powder room is skinny but tall and although we love the natural light it provides, it really doesn’t provide any privacy. After commissioning a stained glass artist last fall to replicate one of the small panels in the front window that I noticed was missing, I thought I would work on a larger design with her for this space as well. My plan is to incorporate the same colours you can see in the front window and some of the same motifs, while also keeping the majority of it in the centre a clear, textured glass. Can you picture it?


ENJOYING THIS CONTENT? CHECK OUT SOME OF MY OTHER EPISODES AND BLOG POSTS!


Toronto Home Renovations - Victorian Style Home - mosaic tiles at Deco Tile showroom

Deco Tiles Showroom located at 142 Tycos Drive in Toronto

VICTORIAN MOSAIC TILE COLLABORATION WITH DECO TILE & WINCKELMANS TILES! #PARTNER

So, I have been keeping a secret from you. A few weeks ago I received an email from Winckelmans Tiles, a French tile manufacturer with factories in Northern France. Having been in business for almost 130 years, they are best known for their mosaic tiles that have been used in numerous hotel, commercial spaces and homes globally.

My first encounter with Winckelmans took place two years ago while designing the finishes for my Toronto home renovation. Their catalogue featured so many beautiful mosaic patterns but what caught my eye was their collection of Victorian tiles. Not only do they have the classic ‘Octagons and Dot’ pattern I was already completely charmed by but they also offer numerous classical Victorian border patterns as well. I was smitten and had to let them know!

Sometimes amazing things happen when you take a chance and put yourself out there, and I’m happy to finally be able to share that I am going to be collaborating with Winckelmans Tiles through their local distributor in Toronto, Deco Tile. Located on Tycos Drive in Toronto, I visited Deco Tiles showroom to place my order for the powder room and front entrance. I went with a classic super white and black Victorian ‘Octagon and Dot’ pattern with a border to match, and for the powder room I decided to extend the pattern and border up one of the walls. I can just picture it now, looking at your reflection in the mirror and seeing the Winckelmans’ pattern on the wall behind you, framing your silhouette. A dream I can’t wait for!

Home Renovations Toronto - victorian homes - Main Drain Replacement

Adam and I kicked off Phase 3 ‘Basement Renovations’ by replacing the main drain and installing a back water valve!

ADAM AND I KICKED OFF PHASE 3 - THE BASEMENT!

Once flooring was complete Adam and I decided it was finally time to kick off Phase 3 of our renovation. If herringbone floors were my dream, Adam’s was having an amazing entertainment space in the basement. Given all the structural work we had to do at the beginning of our renovation, our once finished basement was no more and it was time for us to pull the trigger on replacing and lowering the main drain as well as installing a back water value outside. This required us to not only demo the basement bathroom but begin breaking the concrete floor and digging a 3 foot trench. Of course with all our stuff stored in the basement, this was a big challenge but we were able to successfully knock off those first few tasks before we begin working towards finishing the basement in the spring. Now that the main drain has been replaced and the back water valve installed we can hook up the water, begin removing all the stuff being stored in the basement, and begin the cleaning process!

REFURBISHING OUR CAST IRON TUB

When Adam and I first moved into the house I would never take baths upstairs. For some reason I never felt the supports under the bathtub on the 2nd floor were strong and I was paranoid that I would fall through the ceiling if I filled it with the weight of water in addition to me. Instead I created a little candlelight sanctuary in the basement where we had this beautiful classic claw foot cast iron tub. I loved taking baths in the basement especially since the cast iron tub would keep the water so warm for so long. I knew even before we started the renovation that the tub wasn’t going anywhere and I was determined to have it installed in our new master bathroom on the second floor. Now that we were beginning to kick off phase 3 of our renovation, the tub needed to be disconnected and moved upstairs. During its ‘great migration’ we were not really surprised to learn that only half of the tub was painted gold! The previous owners had neglected to paint the back side of the tub and it was black! I did have plans to have it repainted and refurbished but having two different paints on it didn’t make that job any easier. In addition to the cast iron tub, I also had the small bathroom radiator painted in the same silver so as to match.

toronto home renovations - cast iron tub refinishing and painting

The great migration of my cast iron clawfoot tub begins but not until we have a chance to refinish and paint it!

The week following the completion of our herringbone floors we were able to prime the main floor and paint the crown mouldings. Once that was complete the kitchen cabinetry we had custom ordered from Domani Design Group was delivered and work began on the 2nd floor master bathroom. More on all of this to come in the next episode along with installation updates on our new custom staircase, phase 3 progress and so much more.

Thank you so much for joining me today and for checking out my new Toronto home renovation series on Youtube. I am super excited to be modernizing a Victorian home while still keeping the charm of an old Victorian house. If you have any questions about my Victorian home renovations, what it’s like to live in Little Portugal, Toronto or recommendations for Toronto contractors, hit me up in the comments below!

Before I sign off, I’d also like to say a big thank you to Ironworks Radiator Inc., Parsiena Design, Chestnut Flooring, Domani Design Group, Winckelmans Tiles & Deco Tile for partnering with me on this project. I’m so excited to be working with both local and international industry experts on our Toronto home renovations but want to reiterate that, like always, all opinions remain my own.

Until next time,

- Soheila

MORE ‘BEHIND THE SCENES’ PHOTOS FROM THIS EPISODE


PIN THIS POST

EPISODE 4: HOUSTON, WE HAVE A PROBLEM! - RENOVATING MY TORONTO VICTORIAN HOME

Preparing to demo the middle half of the 2nd floor

RENOVATING MY TORONTO VICTORIAN HOME - EPISODE 4!

Following the completion of the work we did in the back half of the house, Adam and I were definitely riding an emotional high. We knew that even a seasoned contractor would have found the task we had decided to take on to be challenging and the fact that we figured it out ourselves only fuelled our fire to keep going. There was plenty of work still to be done but nothing could have prepared us for what was to come.

Proceeding to lay down a new sub floor on the back half of the second floor, Adam and I still had to demo the walls, ceiling and floors in the middle half of the second floor. Originally we had only planned to widen the staircase in this area but now that we had pulled the second floor into Phase 1 of our renovation, this area would occupy our new hallway that runs along side the stairs as well as our new master bathroom. In order to prepare for framing the new second floor layout though, we would first need to finish demoing this area.


FOLLOW ME ON INSTAGRAM @ISTHATSOH


BEFORE AND AFTER PHOTO’S FROM OUR SECOND FLOOR DEMO!

Chaotic doesn’t even begin to describe how this next task went. Adam and I waded through rubble of lath and plaster, drywall, steel mesh and insulation for hours. The room was so thick with dust we could barely see more then 10 feet in front of us. Thankfully we were prepared with protective Tyvek suits, commercial grade respirators, and lots and lots of garbage bags. In order to avoid the dust from going to other parts of the house we had barricaded ourselves in by first covering the staircase opening with plastic before laying down planks of wood across it and covering it with plywood. There was no way in or out, and Adam and I had to keep going until all the work was done. Six hours, 80 garbage bags, and what felt like 10 pounds of sweat later, we were done. Despite wearing protective gear my legs were black and my face looked like I had a charcoal mask on. We were filthy and completely depleted!

What we didn’t anticipate to find was that the ceiling joists in this section of the house actually run the opposite way as the joists in the rest of the house. This came as a complete shock to us and totally added an unexpected challenge. Unsure of how this would change our plans to frame out a new layout, we knew we would have to have our residential structural engineer to come back in and take stock of our new findings.

STRUCTURAL ENGINEER

Since the very beginning, our structural engineer Ken Davis of K.H. Davis Engineering Consultants LTD has been nothing but amazing. Not only does he have great credentials and has worked on numerous Toronto century homes before, but he has been tremendously helpful with answering all our questions. Whenever a problem has arose during our home renovation that has caused concerns or a need to pivot, he’s been the first one we call and has always found a solution that works for our budget. If you’re even thinking about removing a load barring wall in your house, trust me when I say you’ll want someone like Ken on your team.

As we awaited news from Ken, we still had a lot of work to do. We still needed to finish widening the staircase and level the floors in the middle section of the second floor and we still needed to finish framing the first floor including build bulkheads for our incoming kitchen cabinets. Compared to the joist work we had previously done these tasks were a piece of cake and I actually quite enjoyed learning how to properly frame out a house.

HARDWOOD FLOORING IN TORONTO

Chestnut Flooring Showroom is located at 8601 Jane St, Concord, ON L4K 5N9 Tel: (905) 761-6655

Although our Toronto Victorian home renovation did see yet another unexpected delay, it also gave us time to go shopping for additional flooring for the second floor. Prior to starting our home renovation and my new home renovation series on YouTube, Adam and I talked extensively about what our dream house would look like. One design feature that I was obsessed with incorporating into our renovation was herringbone floors throughout the main floor. Only once we started to visit showrooms and look for a good suppliers did we stumble upon Chestnut Flooring in Vaughan.

Chestnut Flooring is a family-owned, full service, one-stop-shop for all your flooring needs. They offer a wide range of flooring products including hardwood, engineered, laminate, carpet, vinyl and even tile from both well-known domestic and international brands.

Since Adam and I were very happy with the white oak herringbone floors we previously bought from Chestnut Flooring a few months earlier, it was a no brainier for us to pay their showroom another visit now that we needed floors for the second floor. Within an hour we were in and out of the showroom, having found numerous suitable option and given the helpful advice we had received from the co-owner Sherry. I have never been one to make a design decision quickly and even shocked myself with how fast I was able to make a decision. I guess when you know, you know, and being in good hands with a great supplier gave me the comfort I needed to not have to think twice.

Chestnut Flooring has a wide selection of hardwood flooring, engineered flooring, laminate, carpet, vinyl and even tile from both well-known domestic and international brands.

UPDATES ON MY CAST IRON RADIATORS

Following the pickup of our cast iron Victorian radiators for refurbishment, I heard from Ironworks Radiators Inc that one of our radiators did not pass its pressure test. Unfortunately, the ornate Victorian column radiator that we had found hiding behind a clunky rad cover on the main floor was missing a leg and where that leg used to be, was a tiny hole. In order to repair the radiator they would have had to saw it into three pieces, remove that cast iron column where the hole was and solder the remaining two pieces back together. Although Ironworks has successfully done this repair before, there was no guarantee it would work for our Victorian radiators so Adam and I decided that the safest approach to this problem would be to buy an additional vintage cast iron radiator from Ironworks Radiators Inc stockyard.

Ironworks Radiators Inc Stockyard - Located at 367 Bering Ave Etobicoke, ON M8Z 3B1 - By Appointment Only!

Located on the boarder of Toronto and Etobicoke, Ironwork’s stockyard is full of vintage radiators waiting to be refurbished! The owner of Ironworks Jennifer, has been collecting radiators for years often going into old homes and removing all the ornate radiators before they are demolished. She’s always adding new and unique finds and her inventory is always changing which makes each visit fun to her stockyard a fun little treasure hunt. Once there, not only was I able to quickly make a decision about which vintage Victorian radiators I wanted to purchase for refurbishment, but I also got to see a model of the two new Castrad radiators I was planning to purchase for under the twin kitchen windows. I would also come to realize later how helpful browsing her showroom and shop was when it came time to selecting custom colours for all the cast iron radiators I was purchasing! A decision I struggled with for weeks!!

PHOTO’S FROM MY VISIT TO THE IRONWORKS STOCKYARD

Well there you have it, our renovation continues to move ahead now that we have heard back from Ken regarding the second floor. Turns out we will need to do some additional structural work to the second floor, but it’s nothing that Adam, his dad and I can’t handle ourselves. Stay tuned for more on this in the next episode!


ENJOYING THIS CONTENT? CHECK OUT SOME OF MY OTHER EPISODES AND DIY’S


Home sweet Home! My smoke bush out front has grown out of control over the summer! I am looking forward to doing more landscaping and gardening next year!

If you don’t want to wait for the next episode to catch a glimpse of what is happening behind the scenes you can always follow me on Instagram where I share up-to-date stories of my interior design and renovation progress!

Thank you so much for joining me today and for checking out my new Toronto home renovation series on Youtube. I am super excited to be modernizing a Victorian home while still keeping the charm of an old Victorian house. If you have any questions about my Victorian house renovations, what it’s like to live in Little Portugal, Toronto or recommendations for Toronto contractors, hit me up in the comments below!

Before I sign off, I’d also like to say a big thank you to Chestnut Flooring and Ironworks Radiator Inc for partnering with us on this project. I’m so excited to be working with local industry experts on our Toronto home renovations but want to reiterate that, like always, all opinions remain my own.

Until next time,

- Soheila

A shot of the Toronto city skyline in the fall of 2022


PIN THIS POST!