EPISODE 12: THE BIG DIG - BASEMENT UNDERPINNING PT 2 - RENOVATING MY VICTORIAN HOME

Home Renovations in Toronto - Underpinning foundation complete - pouring concrete floor in basement - ICY Reno - Basement renovation Toronto Complete - Structural engineer - Ken Davis engineer

What a transformation! Our basement underpin is officially complete!

* Please Note - Some links in this blog post are affiliate links *

Renovating My Toronto Victorian Home - Episode 12!

With a baby on the way, the clock was ticking!

Three weeks earlier, Adam and I had pulled the trigger on phase 3 of our Toronto home renovations, kicking off the project with a much anticipated basement underpin. We had spent the past few months meticulously planning out the project with our structural engineer Ken Davis all while interviewing a variety of underpinning contractors. Now, three weeks into the basement underpin our basement waterproofing and underpinning contractor ICY Reno had finished pouring all the underpinning sections as well as both bench footings and was starting to dig out all the remaining sand to lower the basement floor for good. You could say things were really starting to take shape.

The Baby’s Nursery

As ICY Reno continued to make headway on the basement, I busied myself with preparing the nursery. This would be Adam and I’s first child and I was eager to nest and create a calming space that I would not only like to spend time in but would also last as a children’s room for years to come. Drawing inspiration from my own childhood bedroom, a handprinted menagerie of exotic birds, I stumbled upon a beautiful woodland themed wallpaper mural online from WallpaperMural.com that was reminiscent of quiet summer mornings at the cottage. The soft palette, friendly furry creatures and beautiful meadow scenery quickly became the main inspiration that I pulled from. In addition to ordering enough traditional wallpaper to create a feature-wall, I also ordered a few extra panels of the same mural in a peel-and-stick format so that I could cut out the creatures and stick them around the room as if they walked out of the mural. This charming effect not only helped tie in the adjacent walls but added another layer of enchantment to an already entrancing room.

At the time, Adam and I had taken over the middle bedroom claiming it as our at-home-office space but after relocating our desks and clearing out the remaining furniture, I had a clean canvas to work with.

Installing our Nursery Room Wallpaper & Picking the Perfect Paint

In the last two months of pregnancy I unexpectedly developed carpal tunnel (apparently this is very common but no one talks about it) making my hands go numb and tingly when put under to much stress. Because of this I found it difficult to keep a grip on tools when working long hours. Thankfully my painter Ariel was happy to assist me with installing the traditional wallpaper mural in the nursery and paint the adjacent walls. For the adjacent walls I pulled two colours from the mural, a green and a blue, that I thought would add to the calming effect of the meadow scene. In the end, I went with ‘Silver Mist’ by Benjamin Moore, a soothing greyish blue colour, perfect for our soon-to-be baby boy.

Interested in adding some wallpaper to your next project? Use my code ISTHATSOH_10 for 10% off your purchase from WallpaperMural.com

HOT TIP: If you are going to buy the extra peel and stick nursery wallpaper panels like me and decal the creatures around the room, make sure to wait a few weeks after painting before applying them! This way the paint has plenty of time to dry and you can avoid pulling the paint off your freshly painted wall when/if you want to switch up the placement of the decal.


FOLLOW ME ON INSTAGRAM @ISTHATSOH


Decorating Our Nursery

To complete the room I chose a simple yet timeless walnut crib by DaVinci (a baby shower gift from my wonderful Aunt Shirley) and ordered three beautiful woodland creature prints to display over the crib, which I also framed in walnut.

Since finishing the second floor renovation in our Toronto Victorian home, I had yet to do anything with the twin closet spaces in the back two bedrooms. Fearing my time was running out, I hurriedly ordered a wardrobe organizer online from IKEA that I knew would do the trick (at least for now) for the baby nursery. I had received a lot of gifts and clothes at my baby shower and was eager to organize them neatly and by growth stage. To aid in this goal I also picked up some velvet baby hangers from Home Sense and ordered a 4-pack of large white and grey fabric storage bins with a cute rope handle detail from Amazon which worked perfectly for my change table and as a hamper. Since I didn’t have time to figure out a door situation for the closet I ended up ordering a tension curtain rod and the most adorable velvet ivory curtains with a pom pom trimmed fringe that revealed just enough of the closet to give you a glimpse of what’s inside while hiding the mountain of diapers and wet wipes.

BTW: I have now included baby gear and nursery decor on my Amazon store front! You can check it out HERE!

My Search for The Perfect Machine Washable Rug

In addition to setting up the wardrobe and crib, I was also on the search for the perfect machine washable rug. I had been eyeing a few online but the expensive price tag that accompanies them prevented me from pulling the trigger. It wasn’t until I was walking on Queen Street with my niece, that I remembered a new Cozey store had opened up close by and decided to pop in to see what they had. To my surprise they had a line up of beautiful machine washable rugs at a fraction of the price I was finding online. What really made me fall head over heels for this brand though was their amazing customer service. After ordering their Savannah washable rug (which comes with a non slip cushioned pad for underneath) and seeing it splayed out in the nursery, I was beginning to have regrets about my choice. Although beautiful, the pattern was too busy for the room and distracted from the nursery wallpaper. When I called them to ask if I can exchange it for their Chloe rug instead, they sent a new carpet to my house without hesitation along with a return slip for the old one. Furthermore, I didn’t even have to drop the old carpet off at the store or bring it to a courier location. All I was required to do was call Purolator and schedule a pick up. Purolator than came to my house to grab the carpet. This hassle-free customer service experience made my life so much easier and given I was beginning to have contractions at the time and labour was imminent, I was incredibly grateful for such spectacular customer service.

Renovating a Victorian houme - baby boy nursery ideas - antique bentwood rocking chair repairs - Furniture Repair - fine carpentry

Two days after baby and I returned from the hospital my fine carpenter dropped off the repaired Bentwood rocking chair!

The Return of Our Bentwood Rocking Chair!

Last but certainly not least, remember the oak Bentwood rocking chair I found on the street and shared via Instagram stories? Well two days after baby and I returned home from the hospital, my wonderful fine carpenter dropped it off! A small section under the seat was in need of repair and my fine carpenter was able to steam, shape and stain a piece of oak to replace the broken section. Both baby and I love the rocking chair! It’s so comfortable, great for nursing and works wonders when rocking our baby boy to sleep. I had the same rocking chair in my childhood bedroom growing up so it also adds an element of nostalgia for me as I begin this journey into motherhood.

WE FOUND A LEAK!

Renovating a Victorian home - front window leak before repair

Our main floor front window started leaking after a few days of torrential downpour

To add another layer of ‘fun’ to our Toronto home renovations, while all of this was going on our main floor front window started leaking. One night (and after a few days of crazy torrential downpour) I came downstairs to the kitchen to grab a glass of water. As I passed through the front room my ears perked up as the sound of water dripping grabbed my attention. Upon further inspection it was clear that water had found its way in from above and had created a crack between the window trim and frame.

This area of the house had been a problem in the past but after completing intensive restorative carpentry work on the windows last fall, we thought we had solved the problem. Turns out the windows may not have been our only entry point for water. The small flat roof above the front window was also in poor shape and the aluminum flashing was peeling off the wall. Furthermore, the brick work on the front facade was in need of remediation as huge gaps could be seen in the mortar and under the sills. A stress crack above our second floor window arch had also formed causing bricks to come loose. Needless to say, all of this needed to be addressed quickly before serious damage (or injury) occurred.

To help solve our unexpected problem we called in our friend Pablo who specializes in flat roof repairs in Toronto. He was able to fix the roof in one day and also put us in touch with Arcana Restoration who was quickly able to set up scaffolding, rebuild the arch above the second floor window and take care of the additional tuck pointing needed to prevent water from getting in.

Once the brick remediation and roof repairs were complete, Pablo came back and tackle our deck. Our French bulldog Sophie loves to sunbathe and the second floor front balcony is her favourite spot. Since we had to take the deck off to do roof repairs, I asked Pablo if we could replace the floor boards with something a little more pet friendly. I wasn’t sure what kind of wood the original deck was built with but it was old, the paint was peeling and if there was ever a time to replace it, the time was now. After going back and forth with Pablo about the different products/materials out there, he convinced me that a sealed cedar deck would not only look beautiful but cedar is a non toxic, pet friendly material with great longevity. In the end, the deck floor he built looked amazing and Sophie is one happy pup now that she has her favourite sunbathing spot back again.


ENJOYING THIS SERIES? CHECK OUT SOME OF MY PREVIOUS EPISODES & BLOG POSTS!


Home renovations Toronto - basement waterproofing Toronto - basement renvoations - Toronto blogs

Basement has been completely dug out and ICY Reno has moved onto waterproofing in preparation for gravel and radiant floor install!

Underpinning Progress and HVAC Delays

While Pablo and Arcana tackled the outside of the house, ICY Reno was making progress inside. They started with disconnecting, lowering and reconnecting the main drain, installed Delta Dimpled membrane to complete the basement waterproofing, and laid a new bed of gravel down in preparation for installation of the radiant floors. Unfortunately for us, I had not applied for an HVAC/Mechanical permit prior to starting our underpin and after talking with Igor at ICY Reno, I started having second thoughts about it. What worried me was, if we proceeded without one, later if we ever needed to apply for one because we were finishing the basement, the city requirements could change and the pipes would already be buried under a few inches of concrete. The safest approach would be to apply for one now, install it as per the current requirements so we don’t have to worry about it coming to bite us in the ass later. The only issue with this new plan was that before applying for the permit we had to get an HVAC designer to put together drawing for us which ate up a few valuable weeks in addition to an extra week for the city to processes and approve the permit.

As we waited for the city to approve our HVAC permit Adam and I celebrated the impending arrival of our baby boy with a baby shower! Friends and family came from near and far, showering us in love, well wishes and gifts for our soon-to-be bundle of joy.

Toronto Victorian Home - Sculptural wall art, mirrored artowrk - 3d art - interior design artwork - Shahla Kareen Friberg - Coronal loop

Introducing Coronal Loop by Shahla Kareen Friberg!

Coronal Loop By Shahla Kareen Friberg

One person who I was especially excited to have visiting was my older sister Shahla. Shahla Kareen Friberg is a multifaceted creative individual who for the past 8 years has been primarily focused on creating sculptural works using glass, mirror, and solder from which she has earned recognition for internationally. From LA to New York, Stockholm and Copenhagen, her works have been featured in numerous exhibitions and art fairs, and now I too would have the honour of exhibiting her work on my walls. Currently living in Sweden, it’s not often enough we get to see each other and up until this point in my pregnancy we had not seen each other since my wedding in Italy last September. Coming by way of Los Angeles, Shahla brought with her a very special piece that I had been eyeing titled Coronal Loop. It was during this visit to Toronto that she was able to deliver and install the piece above my fireplace mantel. An eye catching, light casting, exploding 3D crown of mirror, lead free solder and copper foil. A magnificent piece of art that will surely influence how I decorate the rest of my home once all our renovations are done.

Wrapping Up Our Basement Underpin

After three and a half weeks of HVAC permit delays, we were ready to rock and roll. With permit in hand ICY Reno was able to rough-in the radiant heat in the basement, pass inspection and pour the final concrete floor in less than a week. The only thing left for them to do was some left over Delta Dimpled membrane installation and a final walk though before the job was entirely done. I have to say Adam and I were very happy with the work ICY Reno did on our basement. Igor and his crews were a pleasure to work with were super organized, efficient, and coordinated, and I am confident we would have been able to wrap up the project sooner had there been no HVAC delays. If you are looking for a basement underpinning contractor or need help with interior basement waterproofing, I can’t recommend them enough.

BEFORE AND AFTER PHOTOS OF OUR BASEMENT UNDERPIN

Of course nothing goes smoothly without a well thought out master plan and our Toronto Structural Engineer Ken Davis gave us just that. With over 3000 residential projects under his belt Ken has been helping homeowners and contractors achieve their design and renovation goals. From new builds to additions, laneway home and garden suits, K H Davis Engineering does it all. Not only has Ken helped us before with previous phases of our Toronto home renovation but he has also worked on many century homes in Toronto, which has provided him with a knowledge base anyone hoping to begin a build or renovation would be fortunate to leverage.

Egress Windows Arrive and Underpinning Permit is Closed

With ICY Reno’s work completed, the only thing left we needed to do before we could close our underpinning permit was install our basement windows (which included a new Egress window). Despite having given our manufacturer plenty of lead time, the windows were delayed by close to a month and instead of having the project wrapped up before the babies arrival, it wasn’t until weeks after we came home from the hospital that they were ready for install. As annoying as that was to deal with while navigating life with a newborn, I’m glad to say its over and am happy to report that our underpinning permit is officially closed! YAY!

Toronto home renovations - victorian house with custom staircase

Finishing touches on our custom staircase are complete!

Finishing Work on Our Custom Staircase

To wrap things up for the summer, one last item we were able to check off our ‘to do’ list was finish off our custom staircase. It had been over a year since the new staircase had been installed and there was one small triangle portion under the main staircase that remained unfinished. Now, with a baby at home, this large opening/hole would eventually pose as a danger and therefore shot up to the top of our list of ‘things we needed to do to baby proof the house’. Thankfully my fine carpenter swooped in once again to save the day! It took Graham a good part of a day to compete this small but intricate and detailed task, and now that it’s done the only thing that remains is giving it a good ol’ splash of paint!

Now that the baby has arrived I am in no rush to finish the basement. Everyone says the first few months although challenging are fleeting and I have every intention to focus the majority of my attention on our little one. With that being said I will use the summer to gather inspiration, request quotes, source materials, put together a budget and figure out our next steps in our Toronto basement renovation.

Thank you so much for checking in once again on our Toronto home renovation series and reading this blog post. If you have any questions about renovating a Victorian home, what it’s like to live in Toronto or need recommendations for Toronto contractors/suppliers, hit me up in the comments below!

Toronto skyline

With love from Toronto!

Before I sign off, I’d also like to say a big thank you to K H Davis Engineering, ICYReno, and Wallpapermurals.com for partnering with me on this project. I’m so excited to be working with such reputable companies on our Toronto home renovation but want to reiterate that, like always, all opinions remain my own.

Until next time,

- Soheila


PIN THIS POST

Home renovations in Toronto - A Toronto Victorian Home - baby nursery reveal and underpinning foundation in basement

EPISODE 5: THE BIG PUSH - RENOVATING MY TORONTO VICTORIAN HOME

The silicone mold made by Parsiena Design of my Victorian ceiling medallion

RENOVATING MY TORONTO VICTORIAN HOME - EPISODE 5!

For me, 2022 was a year of firsts. First time doing a home renovation. First time gutting a house. First time demolishing a wall, removing flooring, widening a staircase, doing structural work of any kind, and yet here we are!

A year ago, all the work we have done would have been outside my scope of knowledge. It’s amazing what you can accomplish with a good team of people by your side and I feel so blessed to have worked with such great crews on this project. I am so proud of all that we have accomplished together and without them I would have never gotten this far. So before I kick off this episode, I just want to acknowledge everyone who has supported me and this home renovation series thus far. Without you, it would never have worked and we would never have gotten this far. Thank you for one of the best years of my life. ♡

If this is your first time tuning into my new home renovation series and want to start from the beginning, check out Episode 1: Sledgehammer Therapy and keep up with upcoming episodes by subscribing to my YouTube channel!

Since the last episode, lots has happened at the house! At the end of summer, Adam and I had our roof redone! With five layers of shingles, including the original cedar shingles, the front half of our roof was in rough shape.

Our roof was in serious rough shape before we had it redone!

ROOF REPAIRS & MAINTENANCE

It’s unclear when the previous owners did something to the roof but judging from the state of it, it would only be a matter of time before it would become an issue. The peak was deteriorating and you could see a depression where the old chimney stack used to be. Considering how much effort and money we had already put into this project, we weren’t willing to take the risk of going through another winter without making sure it was sealed tight.

The whole process of removing shingles, repairing any rotten areas, waterproofing, and laying down new shingles took two days. Adding back the eves and aluminum capping took an additional few days but for the most part it was fairly painless.

The worst thing about getting your roof redone is all the debris. I had to make sure it all landed in my front lawn and didn’t damage my neighbours property. At the end of the job I made sure the crew took extra time to clean their properties and they did do a pretty good job. It’s been really nice getting to know my neighbours over the past year and a half (can you believe it’s been that long since we bought our first home) and it’s nice to see that everyone really looks out for one another. One of my neighbours has a snowblower and always does the sidewalks for us. Another always gives us grapes from their garden. Having great neighbours is gift and I lucked out with a bunch of beauties.

One unfortunate outcome that did occur from my roof being redone, was that our smoke bush took a major hit. Despite having cut it back, all the debris that was coming off the roof was falling on the smoke bush causing it to lose entire branches. I had neglected it over the summer and by September it was out of control. I noticed it didn’t flower very well this summer and my mom’s friend who is a horticulturalist advised me to prune it back. I guess the roofers kind of did it for me but I love that smoke bush and really hope it makes an awesome come back next summer.


FOLLOW ME ON INSTAGRAM @ISTHATSOH


STRUCTURAL ENGINEER

Soon after the roof was finished we heard back from our residential structural engineer, K.H. Davis Engineering Consultants LTD who provided us with plans for the second floor.

When I first realized we would have to do structural work on the 2nd floor, my heart dropped. I was so worried about how long it would take and how much it would delay our plans. Turns out, when compared to the work we had already done it wasn’t going to be as complicated or extensive, which came as a huge relief. The new plans required us to install 4 new LVL beams (laminated veneer lumber) which we were confident we could do ourselves, and took us just over a week to complete.

Gearing up to install our fist LVL beam on the 2nd floor. Supports are up and the boys are already removing the top plate.

Most of the work was similar to what we had already done, except the first beam we installed actually had to be built in the air because it was so heavy! We would never have been able to lift it into place, and so we had to lift each piece it into position and connect them all once elevated. After that first massive LVL beam, things got easier. We built the beams on the floor and alleviated some of the lifts with a ‘ladder method’ I once saw our amazing residential structural contractor Raouf use in the basement with a steal beam.

Shout out to Raouf at Dynamic Design and Construction, we miss you and the crew!! We would have never gotten this far without you!!!

The last two beams were pretty simple to install and, much like we had done with the staircase header and floor joists, we connected all the joists that run perpendicular to the beam using joist hangers.

Once all the structural work was complete, Adam and I felt very accomplished. It’s crazy to think a year ago we had no structural or renovation experience whatsoever and here we are building our house from the inside out!

Parsiena Design in the process of making a silicone mold of my ceiling medallion!

MAKING A SILICONE MOLD OF MY CEILING MEDALLION

I know by now you must be thinking ‘Jeeze, this girl and her ceiling medallion’ (I know Adam is), but the original moldings and character of the house was a huge part of what made me fall in love with it in the first place. When Adam told me we would have to level the ceiling in the living room I protested, worried about damaging the almost 150 year old plaster ceiling medallion. I wouldn’t let them touch it without me first finding a solution to either remove it or have it replicated. Enter Parsiena Designs.

Parsiena Designs is one of Canada’s leading manufacturers of stone mantels and architectural elements. I first discovered Parsiena on Instagram and really wanted to work with them. They have a large catalogue full of beautiful medallions, friezes, trims, casing, panels and plaster crown mouldings, and I ended up picking one of their larger, more intricate crown molding designs for my kitchen! For the rest of the main floor, I chose another one of their more simple crown moulding designs, an egg and dart motif which echos the original plaster work found throughout the house.

I also learned that they can do plaster replication. I was so scared of what was going to happen to my ceiling medallion when we would inevitably have to take it down, and I thought a mold of it would be great ‘insurance’. In addition to the ceiling medallion, I also got the door crowns reproduced.

I am so excited to be partnering with Parsiena Designs on this project and can’t wait to see what the house looks like with my new crown mouldings! I think it’s going to really elevate the main floor and allow me to stay true to the original Victorian aesthetic while also providing the flexibility to modernize it.

After the mold was made, we miraculously removed the ceiling medallion. I was so nervous the entire time despite having a mold, but was still determined to do whatever I could to save it (the original is always better after all). Two hours and a miracle later we managed to get it down safely using a drywall lift, a foam pad (used to absorb some of the vibrations), a crowbar, and lots of patience. We were all surprised to learn in the process that it was actually 5 separate pieces instead of just one large piece and although one of the side pieces broke, I knew it was easily reparable and was so thrilled with the outcome.


ENJOYING THIS CONTENT? CHECK OUT SOME OF MY OTHER EPISODES AND DIY’S!


Renovating my victorian home - cast iron radiators - Ironworks radiators - painting a radiator

My newly refurbished, cast iron Victorian radiator being painted at Ironworks Radiator Inc.

PAINTING MY VICTORIAN CAST IRON RADIATORS

Remember this beauty? I first spotted her last summer while treasure hunting in the Ironworks stockyard.

Well in November I received a call from Jennifer at Ironworks Radiator Inc who told me that the ornate Victorian radiators I had purchased from her for refurbishment had been sandblasted and primed, and were ready for painting. It took me weeks to pick colours, but I finally landed on brass for the dining room and an antique bronze for the front foyer. I think both colours will go well with our incoming natural oak herringbone floors and french navy blue cabinetry as well as the brass hardware in the kitchen and the modern Castrad Radiators in bronze gold that arrived at the end of the summer.

I really love the look of ornate cast iron Victorian radiators. To me they are like jewellery, but for your home. Not only are they eye-catching but depending on the colours you pick, they can totally add a pop of glamour to a room. I just loved how these turned out and I can’t wait to have them installed in my home! Which colour is your favourite? Feel free to leave your answer in the comments below!

Framing the 2nd floor - pictured here 2nd and 3rd bedroom

FRAMING THE SECOND FLOOR


Once all the structural work was done on the second floor we could immediately start framing. Besides building the bulk heads on the main floor and one wall, Adam and I didn’t really have a lot of framing experience. Thankfully, Adam’s dad was able to lead the charge and show us how. Within a week we had the new second floor layout entirely framed out. Instead of having only one bedroom on the second floor we now had three and we were able to move the bathroom across the house so it could eventually act as a shared master ensuite.

Overall, the framing was easy and uneventful except for the fact that the new layout I had originally planned for was a little tighter than expected in reality. After mapping out the space, Adam and I realized that the closet necessary to house the laundry machines would have eaten up to much space into bedroom 2 causing it to be significantly smaller than bedroom 3. Adam was also worried about future repairs and having to move them around in such a small space so we both agreed that the easiest and best solution was just to have a laundry area down stairs in the basement for now and keep the bedrooms fairly similar in size. The small space we had left over will now become a ‘hidden’ linen closet - a project I’m excited to work on when we we move onto finishing.

Once all the framing was done we could finally start having all the other trades come through to install plumbing, electrical and heating. The last two weeks in November were crazy! Not only were the other trades able to get all the ‘guts’ in the house done, but we passed inspection and had our new window and back Crittall door installed!

INSTILLATION OF OUR NEW WINDOWS & CRITTALL DOOR

New windows have arrived (early too) and are being installed along with my new Crittall door .

The long awaited arrival of our back door finally happened! Adam and I originally placed our custom order for a new back door in the spring, expecting it to arrive mid summer. Here we were, well into fall, the weather is getting cold and I was super cheesed about how long it was taking. When our new Crittall door finally showed up I was still kind of sour, but what I didn’t know was that the manufacturer had sped up our window order which we had only placed a month prior (which wasn’t suppose to arrive until February) and the whole thing was getting installed in the same day. My whole mood did a 180°! All was forgiven and I was happy as a clam once again.

Plus our new Crittall door turned out amazing! Adam and I put a lot of effort into calculating the perfect glass size ratios for the opening and once it was installed, it was obvious all our hard work had paid off.

The ornate cast iron Victorian vent exchange I used to hide some water pipes with the help of some fancy carpentry work.

A LITTLE FANCY CARPENTRY

One small solo project I took on that I feel so proud about arose after our plumber Steve unknowingly hit a floor joist while running new water lines to the second floor. Having nowhere to go but around the joist and up, I had an opportunity to get creative with some fancy carpentry. Luckily, prior to the demo I made sure to save a few things that were part of the original house like this old vent exchange. I didn’t have any ideas as to what I would eventually use it for but clearly I’m a hoarder of old things and when this situation arose, I finally had the perfect reason to upcycle it. My background in design really came in handy for this little project and I was pretty proud of how it all turned out. All I had to do was build a box that could attach to the wall and be dry-walled in to look like it was meant to be there. The vent would fit inside it, blocking the lines while still making them accessible. Pretty cool, right?

Still smiling despite being incredibly itchy from all the Batt insulation work I’m doing

SPRAY FOAM INSULATION & MY DEAL WITH ADAM

In our relationship, Adam is definitely the spreadsheet guy. He’s the one who organizes our renovations expenses and makes sure we stay on budget. If I spring things on him like wanting new crown mouldings for the main floor, a compromise needs to be made. When planning for this home renovation we had set aside money for Batt insulation but was unaware that we would 1) have to use closed cell spray foam insulation on the 2nd floor ceiling because it is a flat roof (our inspector told us this) and 2) how costly replicating a ceiling medallion and putting in new crown mouldings would be.

So to help make room in the budget for these items, I told Adam I would do all the Batt insulation work myself. Boy did I have my work cut out for me. I had no idea how long it would take or how itchy Batt insulation makes my skin but I really wanted those crown mouldings so a deal was a deal. Although doing Batt insulation work is very easy, to do both floors took me more than a month because I could only do it in piece meal and only after the other trades were finished running electrical lines, PEX, and plumbing in those areas. By the end of it, I was so sick of dealing with insulation and being itchy all the time but I managed to get it all done and saved us a few thousand dollars.

When it comes to closed cell spray foam insulation you want to make sure you hire a trained professional with certified qualifications. Although a popular insulation method and one required by the Toronto Building Code for all non-vented roofs, if not done correctly you could experience toxic off-gassing. For this reason, we originally wanted to use Batt insulation everywhere but after our inspector informed us of the code, we had to compromise and do the 2nd floor ceiling. Thankfully, we were able to find a qualified company with great reviews to do it for us, but it did take some time and a lot of questioning. During our search though we did encounter a few shady companies, which is why I just wanted to take a moment to reiterate the importance of choosing a company wisely.

If you don’t want to wait for the next episode to catch a glimpse of what is happening behind the scenes you can always follow me on Instagram where I share up-to-date stories of my interior design and renovation progress!

Winter has arrived! First snowfall of the year!

Thank you so much for joining me today and for checking out my new Toronto home renovation series on Youtube. I am super excited to be modernizing a Victorian home while still keeping the charm of an old Victorian house. If you have any questions about my Victorian house renovations, what it’s like to live in Little Portugal, Toronto or recommendations for Toronto contractors, hit me up in the comments below!

Before I sign off, I’d also like to say a big thank you to Parsiena Design and Ironworks Radiator Inc for partnering with me on this project. I’m so excited to be working with local industry experts on our Toronto home renovations but want to reiterate that, like always, all opinions remain my own.

Until next time,

- Soheila

MORE BTS PHOTOS FROM THIS EPISODE


PIN THIS POST!

renovating my toronto victorian home - Victorian homes